High Grade Antimony Intercepts Rock Abbey & Magwood
Released
Released
Announcement PDF
ASX Announcement | 23 June 2026
ASX Code: LDR
1
HIGH-GRADE ANTIMONY INTERCEPTS AND LARGE SURFACE
ANOMALIES FROM ROCK ABBEY & MAGWOOD PROSPECTS,
NEW ENGLAND ANTIMONY PROJECT
Highlights
• Lode’s systematic exploration program continues to deliver high-grade results from
the 1,900km2 New England Antimony Project.
• The New England Antimony Project area, which has almost no previous modern
exploration, is located within Australia’s premier antimony province, the New
England Fold Belt, a jurisdiction with established production history relevant to
today’s critical minerals supply chain.
• Initial scout RC drilling at the Rock Abbey mine prospect, one of many antimony
prospects located within LDR’s New England Antimony Project, has resulted in
several high-grade intercepts such as:
Drill hole RKA015 intercepted 2.0 metres @ 3.15% Sb and 0.13 g/t Au
including 1.0 metres @ 6.18% Sb and 0.23 g/t Au
Drill hole RKA003 intercepted 2.0 metres @ 1.31% Sb and 0.34 g/t Au
including 1.0 metres @ 2.22% Sb and 0.63 g/t Au
Drill hole RKA014 intercepted 2.0 metres @ 0.96% Sb and 0.05 g/t Au
including 1.0 metres @ 1.72% Sb and 0.04 g/t Au
• Extensive and systematic soil sampling has revealed highly anomalous
antimony results over significant areas near both the Magwood and Rock Abbey
antimony mines.
At Magwood an 850m long antimony anomaly has been defined and is
coincident with gold mineralisation in float. This large anomaly is located
to the north of the Magwood mine where previous first pass drilling had
intersected 4.8m @ 9.92% Sb.
Another large antimony anomaly, which remains open-ended, has been
located 700m along strike to the southwest of the Magwood mine.
At Rock Abbey several antimony anomalies have been defined over a
1,000m strike length.
On going exploration, including further soil sampling, auger drilling and
geological mapping, is designed to enhance and define existing targets
whilst at the same time delineating new targets further afield.
• Lode’s New England Antimony Project compliment the company’s critical metal
projects in Tasmania where drilling is currently underway at both the Montezuma
Antimony Project and the Granville Tin Project.
Lode’s Managing Director Keith Mayes said: “Solid fieldwork at our New England antimony projects
continue to deliver exciting high-grade exploration results. As the largest exploration license holder in
the New England, with 19 recorded antimony prospects across essentially undrilled ground, Lode is
well positioned to deliver results, specifically on the critical minerals front. Lode’s exploration licences
host numerous recorded antimony prospects with almost no previous modern exploration which means
we are well positioned in our exploration endeavors.”
2
Lode Resources Ltd (‘Lode’ or ‘Company’) (ASX: LDR) is pleased to announce exploration results
from the company’s New England Antimony Project located in the New England region of NSW.
New England Antimony Project – Rock Abbey Mine Prospect First Pass Drilling
The Rock Abbey mine prospect is located within Lode’s New England Antimony Project (EL9662) and
is 8km west-southwest of the Magwood antimony mine prospect. It is also one of several known
antimony prospects located within the project area.
Initial shallow scout reverse circulation (RC) drilling at the Rock Abbey mine prospect has resulted in
several high-grade intercepts over a 100m strike. Please see Tabel 1 and Figure 1.
Table 1. First pass drill results at Rock Abbey antimony prospect
Figure 1. Plan view of first pass RC drill results at the Rock Abbey antimony prospect
Hole Fom To Interval Sb Au
Number (m) (m) (m) (%) (g/t)
RKA003 32.0 34.0 2.0 1.31 0.34
incl. 32.0 33.0 1.0 2.22 0.63
RKA005 39.0 41.0 2.0 0.30 0.03
incl. 39.0 40.0 1.0 0.42 0.01
RKA014 49.0 51.0 2.0 0.96 0.05
incl. 49.0 50.0 1.0 1.72 0.04
RKA015 59.0 61.0 2.0 3.15 0.13
incl. 59.0 60.0 1.0 6.18 0.23
RKA016 71.0 72.0 1.0 0.19 0.02
RKA015: 2.0m @ 3.15% Sb & 0.13 g/t Au
RKA003: 2.0m @ 1.31% Sb & 0.34 g/t Au
RKA014: 2.0m @ 0.96 Sb & 0.05 g/t Au
RKA005: 2.0m @ 0.30% Sb & 0.03 g/t Au
RKA016: 1.0m @ 0.19% Sb & 0.02 g/t Au
open
3
This first pass RC drilling program targeted antimony mineralisation that was historically mined by
artisanal prospectors at Rock Abbey mine. A total of 16 RC holes were drilled for a total 1,009m drilled.
The fault breccia style lodes intercepted host stibnite (Sb₂S₃) mineralisation is ubiquitously surrounded
by a wide and very distinct light coloured silica/sericite alteration halo and is hosted within a dark-
coloured fine grained schist unit.
The Rock Abbey antimony lode strikes WSW- ENE and dips -75° to the north in the eastern portion of
drilled mineralisation and steepens to near vertical in the western portions. Drill holes that did intercept
mineralisation typically encountered wide zones (10-30m) of strong silica/sericite alteration.
A moderate amount of quartz veining, often chalcedonic, and quartz breccia material is associated with
the stibnite mineralisation. Fine grained pyrite mineralisation is also present as a halo to stibnite
mineralisation and no other sulphides were observed.
It is worth noting that, at this early stage, the geology and stibnite mineralisation style encountered in
this first pass drill programme draws strong analogies to that in near surface levels at the Magwood
mine where workings extend to 300m depth. It is also believed that both Rock Abbey and Magwood
antimony prospects occur on the same regional structure which strikes WSW-ENE over potentially
20km within EL9662. The best endowed drill intercept from a previously reported drill programme1
at
Magwood is shown in Table 2. This geological parallel is commercially significant: if Rock Abbey
replicates Magwood’s depth profile, the shallow intercepts reported here may represent only the
uppermost expression of a substantially larger mineralised system.
Table 2. Previously reported drill intercept1 at Magwood mine located 8km ENE of Rock Abbey.
Deeper drilling below the first pass drill maximum depth of 40m at Rock Abbey is warranted together
with drill testing additional antimony targets as defined by mapping and anomalous antimony in soil
sampling (see next section on soil sampling).
Hole From To Interval Sb grade
Number (m) (m) (m) (%)
MAG002 66.0 67.1 1.1 0.15
MAG002 81.3 82.0 0.7 0.13
MAG004 41.5 41.6 0.1 9.65
MAG004 49.5 51.0 1.5 0.17
MAG007 26.0 27.0 1.0 0.08
MAG007 35.7 36.6 0.9 1.28
MAG007 164.3 164.8 0.5 0.11
MAG008 53.0 55.0 2.0 0.17
MAG008 61.0 61.2 0.2 1.75
MAG008 66.5 66.7 0.2 19.20
MAG008 68.0 69.0 1.0 0.25
MAG008 73.5 75.0 1.5 0.86
MAG010 74.3 75.0 0.7 0.88
MAG010 77.0 78.9 1.9 2.20
MAG010 81.5 86.3 4.8 9.92
incl. 82.0 84.4 2.4 19.61
incl. 82.0 83.3 1.3 28.57
MAG010 103.0 106.0 3.0 1.96
incl. 104.0 104.3 0.3 16.60
MAG010 107.2 107.7 0.5 0.20
4
New England Antimony Project – Magwood & Rock Abbey Antimony Anomalies
Over 1,200 soil samples have been collected over the Rock Abbey mine prospect and Magwood
antimony prospect areas. This extensive surface work has revealed several large and coherent
antimony anomalies in soil.
At the Magwood mine prospect soil sampling adjacent to the mine workings was designed to avoid the
extensive workings, mineralised dumps and general high level of contamination. This surface work
outlined a quite significant antimony soil anomaly located a short distance NW of the Magwood mine,
refer to Figure 2. This large anomaly has a strike length extent of 850m and trends SW-NE, a similar
orientation to the Magwood antimony lode.
This antimony anomaly NW of the Magwood mine appears not to be impacted by contamination as it is
largely separated from the Magwood workings area by a steep gully and there are no bonanza soil
antimony values typical of contamination. Interestingly, 3 samples of quartz breccia float located on the
NW edge of this antimony anomaly graded gold, up to 3.34 g/t Au. A follow up deep soil augur sampling
programme has just been completed over this anomaly with the aim being to better define antimony
anomalism before drilling.
Another antimony soil anomaly has been discovered several hundred metres to the SW of the Magwood
mine, refer to Figure 3. This anomaly is not closed off along the northern edge, so these sample lines
are currently being extended.
Figure 2. Plan view of antimony soil anomaly adjacent to the Magwood antimony mine
Antimony soil anomaly
Auger holes
sampled
Gold mineralisation in quartz
breccia float, up to 3.34 g/t Au
Magwood
antimony mine
5
Figure 3. Plan view of antimony soil anomaly adjacent & along strike to the Magwood antimony mine
At Rock Abbey a discrete antimony soil anomaly was found to be coincident with artisanal workings
and mineralised intercepts as reported above in this report. A couple soil samples were found to be
exceptional high (up to 1,315ppm Sb) and were located immediately adjacent to workings. Anomalous
antimony in soils also occurs to the WSW of the Rock Abbey workings resulting a total strike length of
1,000m for this prospect, refer to Figure 4. The Rock Abbey antimony anomaly is a good analogue for
exploration further afield as it mostly represents uncontaminated anomalism due to the lack of extensive
workings, large dumps and minimal ore haulage spillage.
Figure 4. Plan view of antimony soil anomalies at the Rock Abbey antimony mine prospect
Antimony soil anomaly
Magwood
antimony mine
Antimony soil anomaly
Antimony soil anomalies
First pass
RC drilling
6
New England Antimony Exploration Licences – 1,914 km2
Lode’s New England exploration licences EL9662 and EL9319 cover multiple strategic antimony
prospects, including the historical Magwood and Rock Abbey antimony mines. These antimony
prospects, together with Lode’s Montezuma Antimony Project located in Tasmania, forms a strategic
exploration portfolio that is highly prospective for one of the world’s most critical metals.
In total there are 19 recorded antimony prospects within the Exploration Licences EL9662 and EL9319,
both controlled 100% by Lode. Almost no drilling has occurred within Lode’s antimony project areas
despite the geology being considered highly prospective for orogenic structurally-controlled antimony
mineralisation. It is highly relevant that surface work is almost nonexistent prior to Lode
commencement of exploration activities.
The two exploration licences prospective for antimony covers an area of 1,914 km2
and forms a large
proportion of the approximately 2,742km2
of exploration licences that Lode owns in NSW. This makes
Lode the largest holder of exploration ground in the New England Fold Belt.
Exploration within the New England Fold Belt has been limited since the 1970’s with one exploration
hole drilled for every fourteen holes drilled in the Lachlan Fold Belt attesting to the tremendous
discovery potential that may be latent within Lode’s strategic exploration portfolio.
Figure 5: Location of Lode’s EL9662 With Multiple Antimony Prosects
Multiple Antimony
Prospects
Lode’s EL9662
1,105 km2
7
About Lode Resources
Lode Resources Ltd (LDR) is an ASX-listed explorer focused on the highly prospective but under-
explored New England Fold Belt in north-eastern NSW and the Montezuma Silver & Antimony Project
located in Tasmanian’s premier West Coast Mining Province. The Company has assembled a portfolio
of brownfield precious and base metal assets characterised by:
• 100% ownership;
• Significant historical geochemistry and/or geophysics;
• Under-drilled and/or open-ended mineralisation; and
• Demonstrated high-grade mineralisation and/or potential for large mineral occurrences.
This has resulted in a portfolio of assets with diverse mineralisation styles consisting of four core
projects of current focus.
Montezuma Silver & Antimony Project – Located on the west coast of Tasmania, a region well known
for mining activity, the Project consists of a high-grade antimony-silver-lead deposit with initial
development, advanced metallurgical test work and significant beneficiation infrastructure.
Uralla Gold – Located 8km west of the Uralla township, this goldfield was one of the earlier goldfields
discovered in NSW and a significant gold producer in the 1850’s. Despite this long history the
mineralisation style has only recently been recognised as being an Intrusive Related Gold System
(IRGS) and this has strong implications for this project’s discovery potential. Lode’s holdings cover over
300 square kilometres.
New England Antimony Project – Located in one of Australia’s most prolific antimony producing
provinces, 19 antimony prospects have already been identified within the Exploration Licences (EL)
EL9662 and EL9319, both controlled 100% by Lode. The project is anchored by the Magwood Mine,
discovered in the 1880s and mainly worked between 1941 and 1970, and was Australia’s primary
producer of antimony.
Granville Tin Project – Located approximately 5 km west of Zeehan in Tasmania, this project is known
for its high-grade tin skarn mineralisation. Infrastructure includes connection to grid power, ball mill,
gravity tables, spirals, tankage, raw water and a recently constructed tailings dam.
Silver Hills Silver & Antimony Project – Located on the West Coast of Tasmania this Project
completely surrounds the historic Mt Bischoff Mine and is high prospective for high-grade silver–
antimony mineralisation such as that identified at the Silver Cliffs prospect.
Lode’s New England Project Locations
NSW
Twin Hills
Gold & Silver
Mt Carrington
Gold & Silver
Timbarra
Gold & Silver
Hillgrove
Gold &
Antinomy
Webbs
Silver
Rocky River
Gold
Fender
Copper/Zinc
Uralla
Gold
Tea Tree
Gold
Thor
Gold
Sandon
Antimony
New England
Antimony
Webbs Consol
Silver
8
Lode’s Tasmanian Project Locations
This announcement has been approved and authorised by Lode Resource Ltd.’s Managing Director,
Keith Mayes.
For more information on Lode Resources and to subscribe for our regular updates, please visit our website
at www.loderesources.com or email info@loderesoruces.com
No Material Changes
The Company confirms it is not aware of any new information or data that materially affects the information
included in this announcement and that all material assumptions and technical parameters underpinning the
exploration activities in this market announcementscontinue to apply and have not materially changed.
Competent Person’s Statement
The information in this Report that relates to Exploration Results for LDR’s NSW projects is based on information
compiled by Mr Mitch Tarrant, who is a Member of the Australian Institute of Geoscientists. Mr Tarrant, who is a
consultant geologist and project manager for LDR, has sufficient experience which is relevant to the style of
mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a
Competent Person as defined in the 2012 edition of the ‘Australasian Code for Reporting of Exploration Results,
Mineral Resources and Ore Reserves’. Mr Tarrant consents to the inclusion in this Report of the matters based
on the information in the form and context in which it appears.
9
Appendix I
Drill Hole Collar, Orientation, Depth and Interval Information
Appendix II
Drill Hole Assays - only significant assay results are shown
New England Antimony Project References
1.
LDR announcement 17 October 2025 “31.1% Antimony Intercepted in Inaugural Drilling at Magwood NSW”
2.
LDR announcement 25 February 2026 “High-grade Antimony and Gold Mineralisation at Rock Abbey”
3.
LDR announcement 13 April 2026 “Drilling Commences at Rock Abbey Antimony Prospect”
Drill Easting Northing RL Azimuth Dip Depth From To Interval ETW
Hole (m) (deg) (deg) (m) (m) (m) (m) (m)
RKA001 412754 6652630 1155 356 50 70
RKA002 412742 6652635 1155 333 -50 70
RKA003 412688 6652628 1153 347 -50 52 32.0 34.0 2.0 1.3
RKA004 412691 6652626 1153 22 -50 64
RKA005 412689 6652625 1153 320 -50 52 39.0 41.0 2.0 1.3
RKA006 412796 6652694 1160 212 -50 52
RKA007 412797 6652694 1160 180 -50 43
RKA008 412798 6652695 1160 152 -50 42
RKA009 413175 6652735 1168 182 -50 52
RKA010 413173 6652735 1168 2 -50 66
RKA011 413419 6652774 1149 182 -50 67
RKA012 412754 6652619 1155 357 -50 88
RKA013 412743 6652635 1155 342 -50 55
RKA014 412693 6652619 1154 338 -52 61 49.0 51.0 2.0 1.2
RKA015 412735 6652693 1161 144 -65 76 59.0 61.0 2.0 0.8
RKA016 412733 6652694 1161 179 -65 79 71.0 72.0 1.0 0.4
no intercept
no intercept
no intercept
no intercept
no intercept
no intercept
(m gda94 zone 56)
no intercept
no intercept
no intercept
no intercept
no intercept
Sample Drill Fom To Interval Sb Au
Number Hole (m) (m) (m) (%) (g/t)
RC03303 RKA001 59.0 60.0 1.0 0.08 0.01
RC03302 RKA001 58.0 59.0 1.0 0.05 0.01
RC03353 RKA003 34.0 35.0 1.0 0.03 0.02
RC03352 RKA003 33.0 34.0 1.0 0.4 0.05
RC03347 RKA003 32.0 33.0 1.0 2.22 0.63
RC03384 RKA004 41.0 42.0 1.0 0.03 0.01
RC03415 RKA005 41.0 42.0 1.0 0.04 0.03
RC03413 RKA005 40.0 41.0 1.0 0.18 0.05
RC03408 RKA005 39.0 40.0 1.0 0.42 0.01
RC03728 RKA014 52.0 53.0 1.0 0.03 0.01
RC03725 RKA014 51.0 52.0 1.0 0.04 0.03
RC03721 RKA014 50.0 51.0 1.0 0.2 0.06
RC03718 RKA014 49.0 50.0 1.0 1.72 0.04
RC03716 RKA014 48.0 49.0 1.0 0.05 0.02
RC03762 RKA015 62.0 63.0 1.0 0.03 0.01
RC03759 RKA015 60.0 61.0 1.0 0.13 0.02
RC03756 RKA015 59.0 60.0 1.0 6.18 0.23
RC03755 RKA015 58.0 59.0 1.0 0.06 0.01
RC03800 RKA016 71.0 72.0 1.0 0.19 0.02
RC03794 RKA016 65.0 66.0 1.0 0.06 0.11
RC03789 RKA016 64.0 65.0 1.0 0.06 0.08
10
Appendix III
JORC Code, 2012 Edition - Table 1.
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and Quality of sampling (e.g. cut
channels, random chips or specific
specialized industry standard
measurement tools appropriate to the
minerals under investigation, such as
downhole gamma sondes, or handheld
XRF instruments etc.).
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done this would
be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1m
samples from which 3kg was pulverized to
produce 30g charge for fire assay’). In
other cases more explanation may be
required, such as where there is coarse
gold that has inherent sampling problems.
Unusual commodities or sampling types
(e.g. submarine nodules) may warrant
disclosure of detailed information.
Soil Sampling
• Samples were collected by a qualified geologist.
• 1261 soil samples were collected.
• The soil sample weight range was between 0.04kg
to 0.21kg. This is considered appropriate for this
style of sampling.
• Sample locations were surveyed with a handheld
GPS (+- 5m) and marked into sample books and on
sample bags.
Reverse Circulation Drilling
• Industry standard Reverse Circulation (RC) drilling
techniques were used at the Rock Abbey Mine
project to obtain rock chip samples.
• The holes were 5 inch in size.
• RC samples were collected using a 3-way cone
splitter. Samples were collected every metre.
• Composite samples were collected using a
sampling spear.
• The RC sample weight range was between 0.51kg
to 5.9kg with the average sample weight being
2.65kg. This is considered appropriate for this style
of sampling.
• Barren samples were composited together in 4m
composites. Samples containing visible alteration
and mineralisation were sampled per metre.
• Samples were collected by a qualified geologist
• Sampling techniques are considered appropriate for
the style of mineralisation
Drilling
techniques
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details
(e.g.core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit
or other type, whether core is oriented
and if so, by what method, etc).
Reverse Circulation Drilling
• Industry standard Reverse Circulation (RC) drilling
techniques were used at the Rock Abbey Mine
project to obtain rock samples.
• The holes were 5 inch in size.
Drill sample
recovery
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
• Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
• Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
Reverse Circulation Drilling
• The RC samples were weighed to determine
recoveries.
• Recoveries in fresh rock were excellent at 99%
recovery.
• No relationship exists between sample recovery and
grade.
Logging • Whether core and chip samples
have been geologically and
geotechnically logged to a level of
detail to support appropriate Mineral
Resource estimation, mining studies
and metallurgical studies.
• Whether logging is qualitative of
quantitative in nature. Core (or
costean, channel etc) photography.
Reverse Circulation Drilling
• Drill holes were geologically logged by an
experienced geologist to industry standard.
• Geological logs were qualitative with quantitative
estimates of mineral contents.
• Quantitative logging includes sulphide and vein
percentages.
• A representative sample was retained and stored
in chip trays per metre.
• Chip trays were photographed.
11
Criteria JORC Code explanation Commentary
Sub- sampling
techniques and
sample
preparation
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to
the grain size of the material being
sampled.
Soil Sampling
• Samples were sent to ALS Brisbane.
• Samples were dried and then assayed.
• No standards or blanks were inserted.
Reverse Circulation Drilling
• The RC samples were split on the rig using a 3-way
cone splitter.
• Barren samples were composited together into 4m
composites using a sampling spear.
• Samples containing visible alteration and
mineralisation were sampled per metre.
• Samples were sent to ALS Brisbane.
• QAQC included industry best practice insertion of
duplicate, standards and blanks at >5%.
• All QAQC performed within acceptable limits
Quality of assay
data and
laboratory tests
• The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
• Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
Soil Sampling
• Samples were stored in a secure location and
transported to the ALS laboratory in Brisbane by
LDR staff.
• The assay methods included 4 acid digest followed
by multi element ICP-AES spectrometry (ME-
MS41L). Gold was analysed by 30g fire assay
method Au-AA25.
• The assay methods employed are considered
appropriate for total analysis.
Reverse Circulation Drilling
• Samples were stored in a secure location and
transported to the ALS laboratory in Brisbane by
LDR staff.
• Sample preparation comprised drying (DRY-21),
weighing, crushing to 70% passing 2mm (CRU-31)
and a 1kg split pulverized to 85% passing 75um
(PUL-32).
• The assay methods included 4 acid digest followed
by multi element ICP-AES spectrometry
(MEICP61). Gold was analysed by 30g fire assay
method Au-AA25. Sb ore grade was analysed by
fused disc XRF (XRF15b & c) (refer to ALS assay
codes).
• Certified reference materials and blanks were
inserted at a rate of >5% at the appropriate
locations. Coarse and pulp duplicates were
requested at >5%. All QAQC fall within the
accepted limits.
• The assay methods employed are considered
appropriate for total analysis
Verification of
sampling and
assaying
• The verification of significant
intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
• Discuss any adjustment to assay data.
Soil Sampling
• Laboratory results have been reviewed by the
Exploration Manager.
• Significant intersections are reviewed by the
Exploration Manager.
• Commercial laboratory certificates and digital data
were supplied by ALS and uploaded to mining
software.
Reverse Circulation Drilling
• Laboratory results have been reviewed by the
Exploration Manager.
• Significant intersections are reviewed by the
Exploration Manager.
12
Criteria JORC Code explanation Commentary
• No twin holes were drilled.
• Commercial laboratory certificates and digital data
were supplied by ALS and uploaded to mining
software.
• Industry standard QAQC reported within acceptable
limits.
Location of data
points
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic
control.
Soil Sampling
• Samples were located using a handheld GPS with
an accuracy of +-5m
Reverse Circulation Drilling
• Preliminary collar positions were located by
handheld GPS
• Drill holes collars were surveyed with a total station
RTK GPS by licenced surveyors.
• All locations are reported in GDA94 MGA Zone 56.
• Down hole surveys were completed with Reflex EZ-
Track tool at 30m intervals.
Data spacing and
distribution
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade continuity
appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and
classifications applied.
• Whether sample compositing has been
applied.
Soil Sampling
• Samples were spaced at 25m X 50m
Reverse Circulation Drilling
• The holes drilled were for exploration purposes and
were not drilled on a grid pattern.
• Drill hole spacing is considered appropriate for
exploration purposes.
• The data spacing, distribution and geological
understanding is not currently sufficient for the
estimation of mineral resource estimation.
• Unmineralised samples were composited together
into 4m composite samples. Samples containing
visible alteration and mineralisation were sampled
per metre. On resampling of composite samples
was required.
Orientation of
data in relation to
geological
structure
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
Soil Sampling
• N/A
Reverse Circulation Drilling
• Drill holes were designed to intersect the
mineralised lodes approximately perpendicular to
the strike and dip and are considered close to true
width.
• Drill hole orientation is not considered to have
introduced any bias.
Sample security • The measures taken to ensure sample
security.
Soil Sampling
• Samples have been overseen by the Project
Manager during transport from site to the assay
laboratories.
Reverse Circulation Drilling
• Samples were bagged and sealed on site.
• Samples have been overseen by the Project
Manager during transport from site to the assay
laboratories.
Audits or reviews • The results of any audits or reviews of
sampling techniques and data.
• No audits or reviews have been carried out at this
point.
13
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location
and ownership including agreements or
material issues with third parties such as
joint ventures, partnerships, overriding
royalties,native title interests, historical
sites,wilderness or national park and
environmental settings.
• The security of the tenure held at the time of
reporting along with any known
impediments to obtaining a
licence to operate in the area.
Soil Sampling
• Soil sampling was conducted on EL9662
• EL9662 is 100% held by Lode Metals Pty Ltd.
• Native title does not exist over EL9662
• All leases/tenements are in good standing
Reverse Circulation Drilling
• Soil sampling was conducted on EL9662
• EL9662 is 100% held by Lode Metals Pty Ltd.
• Native title does not exist over EL9662
• All leases/tenements are in good standing
Exploration
done by other
parties
• Acknowledgment and appraisal of
exploration by other parties.
• Extremely limited historic rock and soil sampling.
Geology • Deposit type, geological setting andstyle of
mineralisation.
• EL9662 falls within the southern portion of the New
England Orogen (NEO). EL9662 hosts numerous
antimony and gold occurrences. The Magwood and
Rock Abbey mineralisation is very similar and is
likely to be orogenic related and similar to other
orogenic systems in the area such as Hillgrove
locate 40km to the SW.
Drill hole
Information
• A summary of all information material to the
understanding of the exploration results
including a tabulation of the following
information for all Ma
Share your feedback
Discover