High Grade Antimony and Gold Mineralisation at Rock Abbey
Released
Released
Announcement PDF
ASX Announcement | 25 February 2026
ASX Code: LDR
1
ASX Code: LDR | ACN: 637 512 415 | www.loderesources.com
A: Suite 506, Level 5, 50 Clarence Street Sydney NSW 2000| P: +61 (2) 9078 7176 | E: info@loderesources.com
HIGH-GRADE ANTIMONY AND GOLD
MINERALISATION AT ROCK ABBEY
Lode Resources Ltd (‘Lode’ or ‘Company’) (ASX: LDR) is pleased to announce that surface
mapping and sampling at Rock Abbey located 7km southwest of the historical Magwood Antimony
Mine has shown high grade antimony and gold mineralization over a significant strike length.
Highlights
• Mapping and sampling the extension of controlling mineralisation structures to the
southwest of the Magwood Antimony Mine has resulted in the discovery of extensive
antimony and gold mineralisation at Rock Abbey.
• Rock Abbey antimony grab samples assayed by Lode have returned significant antimony
grades including:
37.7% Sb, (sample no. R569)
28.9% Sb, (sample no. R570)
31.5% Sb, (sample no. R571)
23.1% Sb, (sample no. R572)
28.3% Sb, (sample no. R573)
19.5% Sb, (sample no. R574)
• Two samples also returned significant gold values, that being 0.54 g/t Au and 0.24 g/t
Au which indicates Rock Abbey may be analogous to Hillgrove.
• Assays received to date indicate antimony mineralisation potentially extending over a
750m strike length at Rock Abbey. Further mapping and sampling, with assays
outstanding, has been carried out over a 1,700m strike length.
• An initial 10-15 hole drill programme is currently in the planning stage, with drilling
expected to commence post drilling at the Uralla Gold Project.
• Rock Abbey antimony mineralisation is similar to that observed at Magwood. Like
Magwood, Rock Abbey has never previously been drilled, nor undergone any modern
exploration. An initial drill programme at Magwood returned significant drill intercepts
such as 9.92% Sb over 4.8m in drill hole MAG010, including 19.61% Sb over 2.4m1.
• Unlike Magwood, historic workings at Rock Abbey appear to be very shallow. This will
allow for shallow drill targeting and rapid drill results.
• Lode’s focus on antimony exploration is in alignment with the NSW Government’s Critical
Minerals and High-Tech Metals Strategy 2024–2035.
• Drilling is ongoing at Lode’s Montezuma Silver-Antimony Project located in Tasmania’s
premier West Coast Mining Province. Samples from further completed drill holes are
currently being assayed.
• In addition, an extensive follow-up drill programme at Lode’s Uralla Gold Project is
imminent.
Lode’s Managing Director Keith Mayes said: “The discovery of significant antimony and gold
mineralisation at Rock Abbey is a testament to the prospectivity of Lode’s New England Antimony
Project which covers an area of 1,100 sqkm. Like Magwood, the geology of Rock Abbey draws
strong geological analogies with the Hillgrove antimony mine located a short distance to the south.
With very high antimony and consistent gold values at surface we look forward to drilling this
exciting new critical mineral target with drilling planned immediately post drilling at the Uralla Gold
Project”.
2
Lode Discovers Significant High-Grade Antimony at Rock Abbey
Mapping and sampling the extension of controlling mineralisation structures over a 7-kilometre corridor to
the southwest of the Magwood antimony mine has resulted in the discovery of extensive antimony
mineralisation in historical workings at Rock Abbey. Plans to commence an inaugural drilling programme
at the Rock Abbey antimony discovery are in the initial stages of planning and will commence immediately
post drilling at the Uralla Gold Project.
The New England Antimony Project, located in the New England Fold Belt NSW and now comprising Rock
Abbey and Magwood, is the company’s second strategic antimony project and together with the
Montezuma Silver-Antimony Project in Tasmania forms a formidable antimony project portfolio.
A significant drill program at Lode’s Montezuma Silver-Antimony Project located in Tasmania’s premier
West Coast Mining Province is on-going with samples from further completed drill holes currently being
assayed at the ALS laboratory in Burnie.
The planned Rock Abbey drill program is for 10-15 RC holes testing antimony bearing lode structures as
defined by surface mapping and sampling. Like Magwood, Rock Abbey has never been previously drilled,
nor undergone any modern exploration previously. An extensive soil sampling programme, covering Rock
Abbey, Magwood and the intervening structural corridor, is nearing completion and is designed to test for
mineralisation hidden under cover.
An initial drill programme at Magwood returned significant drill intercepts such as 9.92% Sb over 4.8m in
drill hole MAG010, including 19.61% Sb over 2.4m1
. Unlike Magwood, historic workings at Rock Abbey
appear to be very shallow with only one working estimated to be just 20m in depth. This will allow for
shallow drill targeting and rapid drill results.
Mine dump grab samples from Rock Abbey have returned high grade antimony as shown in Table 1 below.
Grab sampling is selective in nature with resultant assay grades considered to be qualitative rather than
quantitative and not necessarily representative of underlying stibnite mineralisation which may be lower or
higher in antimony grade.
The six highest grade grab sample assays ranged from 19.50% Sb in sample R574 up to 37.7% Sb in
sample R569. In addition, two samples returned significant gold values, that being 0.54 g/t Au and 0.24
g/t Au in samples R573 and R568 respectively, indicating the potential for gold bearing lodes at depth.
Table 1. Rock Abbey mine dump grab sample assays - antimony (Sb) and gold (Au)
Assays received to date indicate antimony mineralization extends over a strike length of 750m. Further
mapping and sampling with assays outstanding has been carried out over a1,700m strike length. Antimony
mineralisation is present in stibnite-quartz breccias which is very similar to Magwood.
Sample Easting Northing Rl Sb Au
Number m m m % g/t
R568 412477 6652611 1187 0.23 0.24
R569 412679 6652649 1187 37.70 0.04
R570 412751 6652656 1152 28.90 0.10
R571 412755 6652666 1158 31.50 0.12
R572 412742 6652649 1154 23.10 0.10
R573 412799 6652664 1162 28.30 0.54
R574 412811 6652670 1160 19.50 0.05
R575 413120 6652734 1206 0.37 0.01
R579 413474 6652768 1184
R580 413428 6652749 1192
R581 412366 6652592 1180
R582 411962 6652493 1198
R583 411741 6652423 1212
Awaitingassays
Awaitingassays
Awaitingassays
Awaitingassays
Awaitingassays
3
Figure 1. Summary plan of exploration caried out to date at the Rock Abbey and Magwood prospects, both located within the New England Antimony Project
Rock Abbey
Magwood
4
Figure 2. First pass grab sample assays at Rock Abbey located within the New England Antimony Project NSW
0.23%
Sb
(R568)
Awaiting
Assays
(R579)
37.7%
Sb
(R569)
28.9%
Sb
(R570)
31.5%
Sb
(R571)
28.3%
Sb
(R573)
23.1%
Sb
(R572)
19.5%
Sb
(R574)
0.37%
Sb
(R575)
Awaiting
Assays
(R582)
Awaiting
Assays
(R581)
Awaiting
Assays
(R580)
Awaiting
Assays
(R583)
Rock Abbey
5
Photo 1. Sample R569 – Stibnite-Quartz breccia grading 37.7% antimony (Sb)
Photo 2. Sample R571 – Stibnite-Quartz breccia grading 31.5% antimony (Sb)
1
References
LDR announcement 26 August 2024 titled “Lode Secures Strategic Antimony Prospects”
LDR announcement 13 May 2025 titled “Lode Advances Second High-Grade Antimony Project”
LDR announcement 17 October 2025 titled “31.1% Antimony Intercepted in Inaugural Drilling at Magwood NSW”
6
New England Antimony Exploration Licences – 1,914 km2
Lode’s New England exploration licences EL9662 and EL9319 cover multiple strategic antimony
prospects, including Rock Abbey and Magwood. These antimony prospects, together with Lode’s
Montezuma Antimony Project located in Tasmania, forms a strategic exploration portfolio that is
highly prospective for one of the world’s most critical metals.
In total there are 19 recorded antimony prospects within the Exploration Licences EL9662 and
EL9319, both controlled 100% by Lode. Almost no drilling has previously occurred within Lode’s
antimony project areas despite the geology being considered highly prospective for orogenic
structurally controlled antimony mineralisation. It is highly relevant that modern exploration
work is almost nonexistent. Mineralisation ignored by historical artisanal miners may actually
be quite significant in today’s terms and exploration techniques such as systematic soil sample
may reveal mineralisation under cover.
Exploration licences prospective for antimony covers an area of 1,900 km2
and forms a large
proportion of the approximately 2,700km2
of exploration licences that Lode owns in NSW. This
makes Lode the largest holder of exploration ground in the New England Fold Belt.
Exploration within the New England Fold Belt has been limited since the 1970’s with one
exploration hole drilled for every fourteen holes drilled in the Lachlan Fold Belt attesting to the
tremendous discovery potential that may be latent within Lode’s strategic exploration portfolio.
Field activities have commenced including access discussions with surface landowners.
Figure 3: Location of Lode’s EL9662 With Multiple Antimony Prosects
Multiple Antimony
Prospects
Lode’s EL9662
1,100 km2
7
Figure 4: Location of Lode’s EL9662 & EL9319 Covering Multiple Antimony Prospects
Lode’s EL9662 (1,100 km2
)
Multiple Sb prospects
Lode’s EL9319 (800 km2
)
Multiple Sb prospects
Magwood
Rock Abbey
Lode’s EL8980 (286 km2
)
Uralla Gold Project
8
About Lode Resources
Lode Resources Ltd (LDR) is an ASX-listed explorer focused on the highly prospective but under-
explored New England Fold Belt in north-eastern NSW and the Montezuma Silver & Antimony
Project located in Tasmanian’s premier West Coast Mining Province. The Company has
assembled a portfolio of brownfield precious and base metal assets characterised by:
• 100% ownership;
• Significant historical geochemistry and/or geophysics;
• Under-drilled and/or open-ended mineralisation; and
• Demonstrated high-grade mineralisation and/or potential for large mineral occurrences.
This has resulted in a portfolio of assets with diverse mineralisation styles consisting of four core
projects of current focus
1. Montezuma Silver & Antimony Project – Located on the west coast of Tasmania, a
region well known for mining activity, the Project consists of a high-grade antimony-silver-
lead deposit with initial development, advanced metallurgical test work and significant
beneficiation infrastructure.
2. Uralla Gold – Located 8km west of the Uralla township, this goldfield was one of the
earlier goldfields discovered in NSW and a significant gold producer in the 1850’s. Despite
this long history the mineralisation style has only recently been recognised as being an
Intrusive Related Gold System (IRGS) and this has strong implications for this project’s
discovery potential. Lode’s holdings cover over 300 square kilometres.
3. New England Antimony Project – Located in one of Australia’s most prolific antimony
producing provinces, 19 antimony prospects have already been identified within the
Exploration Licences (EL) EL9662 and EL9319, both controlled 100% by Lode. The
project is anchored by the Magwood Mine, discovered in the 1880s and mainly worked
between 1941 and 1970, and was Australia’s primary producer of antimony.
4. Granville Tin Project – Located approximately 5 km west of Zeehan in Tasmania, this
project is known for its high-grade tin skarn mineralisation. Infrastructure includes
connection to grid power, ball mill, gravity tables, spirals, tankage, raw water and a recently
constructed tailings dam.
Lode’s Tasmanian Project Locations
Granville
Beneficiation Infrastructure
(2M-2018, 32M-1988, EL9-2019)
Montezuma
Silver & Antimony Deposit
(2M-2023, EL7-2019, EL2/2020)
9
Lode’s New England Project Locations
This announcement has been approved and authorised by Lode Resource Ltd’s Managing
Director, Keith Mayes.
For more information on Lode Resources and to subscribe for our regular updates, please visit
our website at www.loderesources.com or email info@loderesources.com
No Material Changes
The Company confirms it is not aware of any new information or data that materially affects the
information included in this announcement and that all material assumptions and technical
parameters underpinning the exploration activities in this market announcement continue to apply
and have not materially changed.
Competent Person’s Statement
The information in this Report that relates to Exploration Results is based on information compiled
by Mr Jason Beckton, who is a Member of the Australian Institute of Geoscientists. Mr Beckton,
who is Executive Director – Resource Development at Lode Resources Ltd, has sufficient
experience which is relevant to the style of mineralisation and type of deposit under consideration
and to the activity which he is undertaking to qualify as a Competent Person as defined in the
2012 edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’. Mr Beckton has a beneficial interest as a shareholder and an option holder
of Lode Resources Ltd and consents to the inclusion in this Report of the matters based on the
information in the form and context in which it appears.
NSW
Twin Hills
Gold & Silver
Mt Carrington
Gold & Silver
Timbarra
Gold & Silver
Hillgrove
Gold & Antinomy
Webbs
Silver
Rocky River
Gold
Fender
Copper/Zinc
Uralla
Gold
Tea Tree
Gold
Thor
Gold
Sandon
Base Metals
New England
Antimony
Webbs Consol
Silver
10
JORC Code, 2012 Edition – Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation
that are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
Surface Mine Dump and Outcrop Rock Sampling
• Surface samples were taken using a hammer.
• Samples were taken of high-grade mineralization.
• Sampling techniques are considered appropriate for first pass qualitative
exploration.
• Samples were pulverized to 85% passing 75 microns at ALS Brisbane laboratory.
• Samples range in weight from 0.84 to 1.64kg.
Drilling
techniques
• Drill type (eg core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (eg core diameter, triple or
• No drilling was conducted.
11
Criteria JORC Code explanation Commentary
standard tube, depth of diamond tails, face-
sampling bit or other type, whether core is
oriented and if so, by what method, etc).
Drill sample
recovery
• Method of recording and assessing core and chip
sample recoveries and results assessed.
• Measures taken to maximise sample recovery
and ensure representative nature of the samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential loss/gain
of fine/coarse material.
• No drilling was conducted.
Logging • Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
• The total length and percentage of the relevant
intersections logged.
• No drilling was conducted.
Sub-
sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether quarter,
half or all core taken.
• If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all sub-
sampling stages to maximise representivity of
samples.
• No drilling was conducted.
12
Criteria JORC Code explanation Commentary
• Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
• For geophysical tools, spectrometers, handheld
XRF instruments, etc, the parameters used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of
accuracy (ie lack of bias) and precision have
been established.
Surface Mine Dump and Outcrop Rock Sampling
• Testing method was 4 acid digest with ICP scan for the major elements, Sb, Ag,
Cu, Pb, Zn.
• Au was tested for using the fire assay method.
• Due to the resistive nature of some Sb minerals to digestion all samples were
also tested using an XRF method for these elements.
Verification
of sampling
and
assaying
• The verification of significant intersections by
either independent or alternative company
personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
• The assay data verified by the Project Manager and Executive Director.
• The assay data has not been adjusted.
• Commercial laboratory certificates and digital data were supplied by ALS
Location of
data points
• Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
• The positions of the rock samples were picked up using a hand-held GPS. The
accuracy of the coordinates is +- 4m.
13
Criteria JORC Code explanation Commentary
used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• All locations are reported in GDA94 MGA Zone 56
• Please refer to Table 1 in the body of this report for sample location coordinates.
Data
spacing and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
• Whether sample compositing has been applied.
• The data spacing and distribution is not currently sufficient for resource
estimation.
• No compositing has been applied to surface rock sampling
Orientation
of data in
relation to
geological
structure
• Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
• If the relationship between the drilling orientation
and the orientation of key mineralised structures
is considered to have introduced a sampling bias,
this should be assessed and reported if material.
• The samples taken were spot samples of high-grade mine dump mineralization.
Sample
security
• The measures taken to ensure sample security. • All samples have been overseen by the Project Manager during transport from
site to the assay laboratories.
Audits or
reviews
• The results of any audits or reviews of sampling
techniques and data.
• No audits or reviews have yet been undertaken
14
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement
and land
tenure
status
• Type, reference name/number, location and
ownership including agreements or material issues
with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
• The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
• The Rock Abbey prospect falls within EL9662.
• Lode Resources, through Lode Metals Pty Ltd, has a 100% interest in this
tenement.
Exploration
done by
other parties
• Acknowledgment and appraisal of exploration by
other parties.
• There are some historical pits but there has been no previously documented
exploration at Rock Abbey.
Geology • Deposit type, geological setting and style of
mineralisation.
• Rock Abbey mineralisation is a structurally controled lode hosted occurrence
within the Dyamberin Beds, a sedimentary package dominated by siltstones,
greywackes, sandstones and in the case of Rock Abbey schist. Antimony is
present as stibnite (Sb2S3) an antimony sulphide mineral. The source of the
mineralising fluids is likely to be orogenic.
Drill hole
Information
• A summary of all information material to the
understanding of the exploration results including
a tabulation of the following information for all
Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on
• No drilling was conducted
• See tables containing relevant surface sample location coordinate details and
assay results in the body of this report.
15
Criteria JORC Code explanation Commentary
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent
Person should clearly explain why this is the case.
Data
aggregation
methods
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or minimum
grade truncations (eg cutting of high grades) and
cut-off grades are usually Material and should be
stated.
• Where aggregate intercepts incorporate short
lengths of high-grade results and longer lengths of
low-grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown
in detail.
• The assumptions used for any reporting of metal
equivalent values should be clearly stated.
• There has been no cut-off applied to the assay grades
Relationship
between
mineralisatio
n widths and
intercept
lengths
• These relationships are particularly important in
the reporting of Exploration Results.
• If the geometry of the mineralisation with respect
to the drill hole angle is known, its nature should
be reported.
• If it is not known and only the down hole lengths
are reported, there should be a clear statement to
this effect (eg ‘down hole length, true width not
known’).
• The samples taken were spot samples of high-grade mineralization
Diagrams • Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported These should
include, but not be limited to a plan view of drill
hole collar locations and appropriate sectional
views.
• Refer Figure 1 and 2 as well as Tabe 1 in the body of this report for sample
locations.
16
Criteria JORC Code explanation Commentary
Balanced
reporting
• Where comprehensive reporting of all Exploration
Results is not practicable, representative reporting
of both low and high grades and/or widths should
be practiced to avoid misleading reporting of
Exploration Results.
• All assay results have been reported for the Rock Abbey prospect.
• All exploration results discussed in this report are included in the tables and
figures associated with this report.
• Exploration results previously reported in LDR ASX announcements are listed at
the end of this report.
Other
substantive
exploration
data
• Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysical survey
results; geochemical survey results; bulk samples
– size and method of treatment; metallurgical test
results; bulk density, groundwater, geotechnical
and rock characteristics; potential deleterious or
contaminating substances.
• No other data has been generated
Further work • The nature and scale of planned further work (eg
tests for lateral extensions or depth extensions or
large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible
extensions, including the main geological
interpretations and future drilling areas, provided
this information is not commercially sensitive.
• An initial RC drill program is planned. Further geological mapping and surface
sampling will also occur.
Share your feedback
Discover