Quarterly Activities/Appendix 5B Cash Flow Report
Released
Released
Announcement PDF
ASX Announcement | 31 July 2024
QUARTERLY ACTIVITIES REPORT
FOR THE PERIOD ENDING 30 JUNE 2024
June Quarter Highlights
•
Planning continued for follow-up drill campaign at the Webbs Consol Silver Project and
a 2,200m, 17-hole program commenced post Quarter end.
•
Targeting the northern region of the Project, key targets include untested surface silver
occurrences such as Canoon prospect, as well as previous discoveries demanding
follow up including Webbs Consol North, with previous intercepts of up to 779 g/t AgEq
close to surface & Castlereagh, with grades of up to 800g/t AgEq also close to surface.
•
CSIRO completed a research study at the Webbs Consol Silver Project and key findings
have further enhanced the project’s potential:
o
Structural analysis and 3D modelling of Tangoa West, Main Shaft and other prospects identified
potential for lateral extensions to mineralisation.
o
Relative depth of differing styles of alteration appears constant at all prospects.
o
Comprehensive understanding of mineral deposit genesis enabling comparison with other similar
deposits.
o
3D models and the use of innovative geochemical indicators, validated by mineralogical and
mineral‐chemical analyses, suggesting distinct mineralisation styles and ore zones.
•
1,159 auger drill holes completed across ~1.6km2 at the Hudson’s group of prospects at
Uralla Gold Project.
•
Multiple drill targets have been defined at Uralla with gold and pathfinder metals gridded,
imaged and/or contoured showing:
o
Delineation of numerous gold anomaly highs, with assays up to 1,300 ppb Au, each representing a
prospective drill target.
o
~50% of the defined gold anomalies have no hard rock outcrop, potentially indicating blind gold
mineralisation, whilst other gold anomalies are enhancing previous surface work.
o
Dyke/Gracie Lode area gold anomalies appear to form a circular feature potentially representing an
intrusive pluton and large mineralisation system at depth.
o
Pathfinder elements anomalies also potentially represent mineralised lodes which are not obvious
near surface.
•
Future drilling is planned at Uralla designed to test for the presence of an Intrusive
Related Gold System (IRGS).
•
New and extensive exploration licence granted by the NSW government to Lode.
o
EL9662 covers an area of 399 units or approximately 1,105 square kilometres, and is prospective
for orogenic structurally-controlled antimony mineralisation.
o
Several recorded antimony prospects within the EL9662 exploration licence area, including the
historic Magword antimony mine.
o
The Magwood mine was Australia’s primary producer before the focus switched to Hillgrove in
1969.
o
Lode intends to commence preliminary exploration on EL9662 during the September quarter.
ASX Code: LDR
|
ACN: 637 512 415
A: Level 5, 1 Margeret St Sydney NSW 2000
|
|
www.loderesources.com
P: +61 2 9199 8017
|
E: info@loderesources.com
During the June 2024 quarter, Lode primarily focused its exploration activities on the Company’s 100%
owned Webbs Consol Silver Project (“Webbs Consol”) and 100% owned Uralla Gold Project (“Uralla”),
both located in the New England Fold Belt in north-eastern New South Wales.
Webbs Consol Silver Project
During the June 2024 quarter preparations for follow up drilling at the Webbs Consol Silver Project were
carried out and with initial holes underway subsequent to quarter’s end 52,54. The 2,200m, 17-hole program
is being undertaken by Centurion Drilling at the Webbs Consol Project with the entire program expected
to take ~6 weeks.
This current program has 2 objectives: i) testing for extensions at discovered lodes with multiple highgrade silver intercepts11,14,15,22,24,27,35,36,37,39,40,44,47 & ii) drilling untested surface silver occurrences 2,3 (See
Figures 1 & 2).
The first drill holes are targeted at the Webbs Consol North discovery where previously reported
intercepts included 13.0m @ 193 g/t AgEq1 from 10.0m & 21.0m @ 122 g/t AgEq1 from 2.0m, including
high-grade zones such as 779 g/t AgEq1 over 3m and 592 g/t AgEq1 over 3m.
To date the majority of extension drilling has been carried out at Tangoa West, in the southern end of the
Project, where 12 drill holes intercepted exceptionally high-grade silver mineralisation down to a vertical
depth of 300m.
Another key discovery to be tested is Castlereagh with previously reported intercepts of 50.0m @ 224
g/t AgEq1 from 17.0m and 47.4m @ 112 g/t AgEq1 from 66.5m, including high-grade zones such as 801
g/t AgEq1 over 4.1m and 720 g/t AgEq1 over 2.0m.
Untested surface silver occurrences to be drilled include the Canoon prospect where a pseudo-gossan
with ~ 100m of strike has been delineated and selective grab samples have returned up to 126.0 g/t Ag2,3
(It should be noted that grab samples are qualitative in nature and are not necessarily representative of
underlying mineralisation which may be lower or higher in grade and the dimensions are unknown).
Prior follow-up holes have often shown high-grade mineralisation to be contiguous with depth, with silver
mineralisation showing continuity throughout both the upper lead-rich and the lower zinc-rich zones.
Figure 1: Centurion Drilling rig on site at the Webbs Consol North Discovery
2
Figure 2. Lode’s Webbs Consol Silver Project (EL8933) - Location of main lodes, significant drill
hole intercepts to date1,11,14,15,22,24,27,35,36,37,39,40,44,47 and grab samples at the Canoon prospect2,3
N
WCS070: 21.0m @ 122 g/t AgEq1 from 2.0m
WCS071: 13.0m @ 193 g/t AgEq1 from 10.0m
WCS072: 34.0m @ 82 g/t AgEq1 from 18.0m
WCS074: 20.0m @ 83 g/t AgEq1 from 75.0m
Grab samples: 126.0 g/t Ag, 84.2 g/t Ag, 81.9
g/t Ag, 64.6 g/t Ag, 32.1 g/t Ag and 27.6 g/t Ag
WCS008: 21.2m @ 44 g/t AgEq1 from 24.0m
WCS009: 10.0m @ 77 g/t AgEq1 from 70.0m
WCS026: 34.3m @ 46 g/t AgEq1 from 28.7m
WCS029: 30.5m @ 41 g/t AgEq1 from 138.4m
WCS006: 27.5m @ 357 g/t AgEq1 from 104.6m
WCS007: 24.2m @ 273 g/t AgEq1 from 122.9m
WCS028: 43.6m @ 83 g/t AgEq1 from 138.4m
WCS012: 12.1m @ 282 g/t AgEq1 from 48.0m
WCS023: 50.0m @ 224 g/t AgEq1 from 17.0m
WCS031: 47.4m @ 112 g/t AgEq1 from 66.5m
WCS034: 20.5m @ 210 g/t AgEq1 from 16.0m
WCS035: 13.7m @ 214 g/t AgEq1 from 23.3m
WCS019: 26.7m @ 351 g/t AgEq1 from 30.1m
WCS020: 31.0m @ 192 g/t AgEq1 from 30.6m
WCS044: 54.0m @ 245 g/t AgEq1 from 48.3m
WCS045: 116.1m @ 721 g/t AgEq1 from 90.9m
WCS047: 24.5m @ 971 g/t AgEq1 from 144.7m
WCS049: 44.2m @ 221 g/t AgEq1 from 81.8m
WCS050: 65.8m @ 755 g/t AgEq1 from 104.4m
WCS051: 30.7m @ 289 g/t AgEq1 from 79.0m
WCS052A: 149.2m @ 455 g/t AgEq1 from 98.0m
WCS052B: 40.2m @ 466 g/t AgEq1 from 279.0m
WCS064: 27.7m @ 407 g/t AgEq1 from 203.3m
WCS065: 33.2m @ 332 g/t AgEq1 from 270.0m
All widths are down hole
3
Table 1. Lode’s Webbs Consol Silver Project (EL8933) - Significant drill intercepts to
date1,11,14,15,22,24,27,35,36,37,39,40,44,47
From
To
Interval
AgEq1
ZnEq1
Ag
Pb
Zn
Cu
(m)
(m)
(m)
(g/t)
(%)
(g/t)
(%)
(%)
(%)
WCS045
90.9
207.0
116.1
721
22.33
254
6.35
8.35
0.24
Tangoa West
WCS052A
98.0
247.2
149.2
455
14.09
183
3.13
5.19
0.19
Tangoa West
WCS050
104.4
170.2
65.8
755
23.37
266
13.56
2.38
0.42
Tangoa West
WCS047
144.7
169.2
24.5
971
30.06
389
1.56
16.00
0.24
Tangoa West
WCS052B
279.0
319.2
40.2
466
14.41
83
0.16
11.56
0.04
Tangoa West
WCS065
270.0
303.2
33.2
332
10.26
64
0.14
8.13
0.01
Tangoa West
WCS064
203.3
231.0
27.7
407
12.60
146
0.35
7.69
0.03
Tangoa West
WCS044
48.3
102.3
54.0
245
7.57
84
3.69
1.22
0.21
Tangoa West
WCS023
17.0
67.0
50.0
244
7.56
94
2.93
1.81
0.08
Castlereagh
WCS006
104.6
132.1
27.5
357
11.03
118
0.77
6.52
0.07
Main Shaft
WCS049
81.8
126.0
44.2
221
6.85
68
4.16
0.56
0.20
Tangoa West
WCS051
79.0
109.7
30.7
289
8.95
93
3.88
2.13
0.21
Tangoa West
WCS019
30.1
56.8
26.7
351
10.86
115
6.43
1.07
0.25
Tangoa West
WCS007
122.9
147.1
24.2
273
8.46
63
0.49
5.96
0.04
Main Shaft
WCS020
30.6
61.6
31.0
192
5.95
55
3.37
0.98
0.12
Tangoa West
WCS031
66.5
113.9
47.4
112
3.47
46
0.79
1.22
0.04
Castlereagh
WCS034
16.0
36.5
20.5
210
6.51
77
1.10
2.87
0.10
Copycat
WCS028
138.4
182.0
43.6
83
2.58
12
0.28
1.91
0.02
Main Shaft
WCS012
48.0
60.1
12.1
282
8.73
108
5.49
0.36
0.10
Mt Galena
WCS035
23.3
37.0
13.7
214
6.62
87
0.71
2.61
0.26
Copycat
WCS070
2.0
23.0
21.0
122
3.76
97
0.33
0.35
0.01
WC North
WCS072
18.0
52.0
34.0
82
2.54
25
0.63
1.19
0.01
WC North
WCS071
10.0
23.0
13.0
193
5.97
82
0.36
3.03
0.01
WC North
WCS026
28.7
63.0
34.3
46
1.43
23
0.13
0.26
0.06
Luck Lucy N
WCS074
75.0
88.0
13.0
83
2.57
20
0.49
1.45
0.01
WC North
WCS008
24.0
45.2
21.2
44
1.36
17
0.09
0.14
0.01
Luck Lucy N
WCS009
70.0
80.0
10.0
77
2.39
45
0.09
0.17
0.23
Luck Lucy N
WCS029
36.3
42.1
5.8
41
1.26
10
0.43
0.55
0.01
Luck Lucy N
Hole
Prospect
4
CSIRO Research Enhances Upside at Webbs Consol Silver Project49
During the June quarter Lode reported that Australia’s national science agency, CSIRO, has completed
a research study at Lode Resources’ Webbs Consol Silver Project in New South Wales, funded through
the Entrepreneurs’ Programme Innovation Connections Grant (ICG002410).
In 2023, CSIRO, funded through the Entrepreneurs Programme Innovation Connections Grant
(ICG002410), was engaged to undertake a collaborative research project to achieve a comprehensive
understanding of the characteristics of hydrothermal Zn‐Ag‐Pb sulphide mineralisation linked to the ca.
256 Ma Webbs Consol Leucogranite in the New England Fold Belt (NEFB). CSIRO produced a
comprehensive 79-page research report titled “Webbs Consol silver and base metal deposit
characterisation, New England Fold Belt, NSW” a summary of which was release to the market during
the quarter.
The project included mapping of structures in drill core and the field, covering prospects throughout the
research area, including Copy Cat, Castlereagh, Mount Galena, Lucky Lucy, Lucky Lucy North, Main
Shaft, and Tangoa West. The findings were integrated with existing structural information provided by
Lode Resources, allowing the creation of 3D models that support the multi‐scale structurally‐controlled
nature of mineralisation.
To constrain hydrothermal alteration styles (chloritisation and sericitisation) and mineralisation
processes, CSIRO conducted whole‐rock geochemical analyses and micro‐analytical characterisations
on unaltered granite and mineralised samples from a number of prospects (Tangoa West, Main Shaft,
Castlereagh, and Lucky Lucy North). The results were integrated with whole‐rock assay data supplied
by Lode Resources to geochemically classify the granitic intrusions and discriminate alteration and
mineralisation zones.
A robust correlation between alteration styles
and metal endowment was established through
the integration of geochemical data, hyperspectral
(FTIR) core logging results, petrophysical data, as
well as micro‐XRF elemental mapping and
mineralogical/mineral‐chemical characterisations
of drill core samples.
The chloritised mineralisation are characterised by
high Zn concentrations, with Fe‐rich sphalerite
containing numerous chalcopyrite inclusions
(chalcopyrite disease). The sericitised zones
exhibit ‘ordinary’ sphalerite but enrichments in Pb
and As, primarily manifesting as galena and
arsenopyrite together with blebby chalcopyrite.
Furthermore, the sericitised samples prominently
feature Ag‐rich sulphide grains bound to galena‐
chalcopyrite±arsenopyrite assemblages. Similar
Ag concentrations were observed in chloritized
samples, but Ag‐rich sulphide grains are rare. This
discrepancy may be attributed to the preferential
uptake of Ag by sphalerite, or by the microscopic
inclusions of chalcopyrite enclosed within the
sphalerite.
Figure 3. Photomicrographs and micro‐XRF
elemental distribution maps (K, Si, Fe, and Zn, As,
Pb, Cu) of strongly altered samples in drill hole
WCS045. 49
Chloritized granite
Sphalerite
Sphalerite
Sphalerite
Sphalerite
Sphalerite
Galena
Sericitised granite
5
Figure 4. BSE image overlaid with EDS elemental distribution map showing large accumulation
of galena with overgrowths of Ag‐Sb‐Bi‐rich sulphide phase in drill holed WCS045. 49
Figure 5. Reflected light microscopy images along with TESCAN‐TIMA mineral and Ag‐Sb sulphide
distribution maps of mineralised chloritised samples for drill hole WCS045. The presence of Ag‐Sb‐rich
sulphide grains is highlighted by red circles. Sphalerite is discriminated based on its Fe content [low‐Fe sphalerite
(light red) < 10 wt% Fe < high‐Fe sphalerite (red), with up to c. 15 wt% Fe). Chlorite is discriminated based on its
Mn content (low‐Mn chlorite < 4 wt% Mn < high‐Mn chlorite). 49
By understanding the alteration style and mineralisation process at each prospect a consistent trend
of hydrothermal alteration patterns and ore zones relative to elevation across the entire Webbs
Consol mineral system can be observed.
Using a threshold elevation of 700 meters above sea level, consistent patterns are summarised as:
i.
The lower ore zones (characterised Ag and Fe‐bearing Zn‐rich mineralisation) at Tangoa West
and Main Shaft are consistently found at greater depths, below the 700‐meter threshold, and;
ii.
The upper ore zones (characterised by an assembly of Ag‐Zn‐Pb‐Cu mineralization) throughout
the Webbs Consol mineral system predominantly appear at elevations exceeding 700 meters.
This observation suggests very limited rotation and likely preservation of mineralisation around the entire
perimeter of the Webbs Consol Leucogranite.
At Tangoa West, zinc data from drillholes support steep ESE and ENE anisotropic fields, further
suggesting that the mineralisation, regardless of whether genetic/structural connections between the two
ore zones exist, are steeply plunging and overall linear.
6
Figure 6. 3D model of Tangoa West prospect showing drill hole Zn assays and modelled 5.0% Zn anisotropic iso‐surfaces (Ag and Pb
assays are not shown). Modelled anisotropic iso-surfaces based on drill assays, alteration vectors and dominant controlling structural (left diagram:
85° towards 105° – 3:3:1 & right diagram: 85° towards 60° – 3:3:1). Please note this modelling is conceptual. All assays have been previously reported
prior to the June quater11,14,15,22,24,27,35,36,37,39,40,44,47
Drill
Target
300 metres
depth
Drill
Target
Drill Hole WCS052
149.2m @ 455 g/t AgEq or 14.09% ZnEq &
33.2m @ 332 g/t AgEq or 10.26% ZnEq
Drill Hole WCS052
149.2m @ 455 g/t AgEq or 14.09% ZnEq &
33.2m @ 332 g/t AgEq or 10.26% ZnEq
7
Figure 7. 3D model of Tangoa West prospect showing drill hole AgEq assays and
interpreted lode (blue shell) as well as both modelled 5.0% Zn anisotropic iso‐surfaces from
Figures 6. Modelled anisotropic iso-surfaces based on drill assays, alteration vectors and
dominant controlling structural (Orange shell: 85° towards 105° – 3:3:1 & right diagram: 85°
towards 60° – 3:3:1). Please note this modelling is conceptual. All assays have been previously
reported prior to the June quarter11,14,15,22,24,27,35,36,37,39,40,44,47
Drill Hole Assays
AgEq g/t
Drill
Target
300 m
depth
Drill
Target
Drill Hole WCS052
149.2m @ 455 g/t AgEq or 14.09% ZnEq &
40.2m @ 466 g/t AgEq or 14.41% ZnEq
8
The results of this research constrained ore genesis and comparisons with potentially similar
vein/pipe‐like Zn‐Ag‐Pb deposits within the NEFB and on a global scale. The observation of
chloritised Fe‐rich sphalerite mineralisation prevailing at greater depths, while sericitised Zn‐Pb‐As‐
rich mineralisation occur at shallower levels, aligns with earlier reports of a vertical zonation pattern
of metals at Webbs Consol. We interpret that the lower, deeper chloritised Zn‐rich zones have
formed closer to hot fluid sources, perhaps at temperatures of up to 400 °C, resembling mesothermal
mineralisation styles. In contrast, the upper ore zones may have formed under cooler conditions,
promoting sericitisation in the 200‐300 °C range.
Overall, we note similarities in terms of deposit geometry and mineralisation style compared to
certain deposits associated with the Gilgai Granitic suites in the NEFB, such as the Conrad Mine.
Additionally, similarities are noted with the Devonian Zeehan and Dundas Pb‐Zn‐Ag ore fields in
Tasmania and several world‐class deposits located in orogenic belts of Central/Eastern Asia and
Northern America.
Table 2. Comparison of the Webbs Consol Silver and Base Metal Deposit with selected Australian and
global base metal sulphide deposits of comparable origins49.
9
Uralla Gold Project - Auger Drill Programme Results
Over a 2-month period 1,192 auger drill holes were completed on a 25m x 50m grid spacing covering
an expansive 1.6km2 area covering the Hudson’s group of prospects (Gumtree, Dyke, Martins Shaft)
at Lode’s Uralla Gold Project48,51.
The aim of the auger drill program was to identify areas of anomalous gold values as well as
pathfinder elements near surface so as to identify new drill targets in the Hudsons area as well as
assisting with deeper and infill drill targeting planned for this year.
An earlier high-density auger drill survey was successful in defining the Gumtree prospect, one of
several gold prospects within the Uralla Gold Project. Sampling deeper soils (C horizon) closer to
bed rock has demonstrated more coherent anomaly definition for gold as well as pathfinder metals.
During the June 2024 quarter all assays where received51 from this significant auger drill program
with gold and pathfinder metals imaged and/or contoured as shown in Figures 8 to 11. A number of
observations and interpretations can be made including:
•
Numerous gold anomaly highs (>10) have been defined, each representing a prospective drill
target.
•
289 auger samples graded >10 ppb Au, 23 auger samples graded 100 ppb Au and 3 auger
samples graded 1,000 ppb Au with the highest being 1,300ppb Au.
•
Over half of the gold anomalies defined have no hard rock outcrop, potential indicate blind
mineralisation, whilst other gold anomalies have enhanced previous surface work.
•
Two Au anomalies have been tested by earlier preliminary drilling2,18 with the best intercepts
being KTN010: 15.0m @ 2.09g/t Au from 12m and KTN007: 14.0m @ 1.24 g/t Au from 68m
for the Dyke/Gracie and Redgum Prospects respectively. Only the Martin Shaft Prospect has
been extensively drill tested by a previous exploration licence holder (Sovereign Gold
Company Ltd) with the best intercept being SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m.
See Table 3.
•
A number of gold anomalies in the Dyke/Gracie Lode area appear to form a circular feature
potentially representing an intrusive pluton at depth and a source of mineralisation (see
Figures 8,9 & 12).
•
There is a strong correlation between gold and pathfinder metals including a broad association
with antimony. Pathfinder elements can help define mineralised lodes which are not obvious
near surface.
•
Historic drilling by a previous exploration licence holder (Sovereign Gold Company Ltd)
focused on Martin Shaft prospect resulting in numerous gold intercepts. Confirmation drilling
will be required as much of this work predates the JORC code - 2012 edition1,2,18.
The highest endowed diamond and RC drilling results from earlier drill programs are shown in Table
3.
10
Table 3. Drilling at the Hudson’s group of prospects, Uralla Gold Project (previously reported2,18.)
Hole No.
SGRDD002
incl.
SGRDD004
incl.
SGRDD014
incl.
SGRDD008
incl.
SGRDD010
incl.
SGRRC004
incl.
KTN010
incl.
incl.
SGRRC017
SGRRC003
incl.
SGRDD003
incl.
SGRRC001
incl.
From
To
Interval
Gold
(m)
(m)
(m)
(g/t)
15.0
24.0
52.0
57.0
16.0
21.0
73.0
73.5
78.0
84.0
4.0
13.0
12.0
15.0
15.0
76.0
25.0
39.0
29.0
37.0
0.0
15.0
41.0
38.0
70.0
64.0
36.0
29.0
97.0
92.0
113.0
89.0
28.0
23.0
27.0
22.0
19.0
102.0
54.0
45.0
62.0
44.0
27.0
24.0
26.0
14.0
18.0
7.0
20.0
8.0
24.0
18.5
35.0
5.0
24.0
10.0
15.0
7.0
4.0
26.0
29.0
6.0
33.0
7.0
27.1
9.0
2.80
4.82
3.51
7.47
2.33
5.40
1.88
2.41
1.10
3.29
1.60
3.00
2.09
3.65
4.18
1.20
1.21
2.90
0.91
2.83
1.06
2.41
Target
Endowment
(m.g/t)
Hole No.
Martin Shaft
72.78
Martin Shaft
63.23
Martin Shaft
46.69
Martin Shaft
45.03
Martin Shaft
38.50
Martin Shaft
38.32
Dyke
31.38
Martin Shaft
Martin Shaft
31.29
35.09
Martin Shaft
30.12
Martin Shaft
28.83
SGRRC006
incl.
SGRRC005
incl.
SGRRC011
incl.
KTN007
incl.
and
KTN007
SGRRC002
incl.
SGRDD006
KTN005
incl.
KTN006
incl.
incl.
SGRDD001
SGRDD005
SGRRC022
SGRDD009
From
To
Interval
Gold
(m)
(m)
(m)
(g/t)
35.0
37.0
23.0
25.0
46.0
57.0
68.0
73.0
77.0
96.0
16.0
26.0
32.0
9.0
9.0
10.0
10.0
10.0
0.0
0.0
112.0
75.0
52.0
44.0
38.0
32.0
64.0
63.0
82.0
75.0
80.0
100.0
35.0
33.0
51.0
19.0
14.0
26.0
18.0
14.0
13.0
20.0
128.0
90.0
17.0
7.0
15.0
7.0
18.0
6.0
14.0
2.0
3.0
4.0
19.0
7.0
20.0
10.0
5.0
16.0
8.0
4.0
13.0
20.0
16.0
15.0
1.61
3.54
1.60
3.13
0.95
2.23
1.24
2.04
2.21
0.76
0.82
1.36
0.73
1.32
2.49
0.79
1.04
1.59
0.96
0.54
0.58
0.55
Target
Endowment
(m.g/t)
Martin Shaft
27.32
Martin Shaft
24.06
Martin Shaft
17.17
Gum Tree
17.29
Martin Shaft
15.56
Martin Shaft
Gum Tree
14.53
13.15
Gum Tree
12.58
Martin Shaft
Martin Shaft
Martin Shaft
Martin Shaft
12.48
10.84
9.22
8.20
Figure 8. Gold assay gridded image and contouring in the Dyke/Gracie Lode area located within the
Hudson’s group of prospects, Uralla Gold Project.
11
Figure 9. Gold assay grided image and contouring of 1,192 auger drill holes covering the Hudson’s
group of prospects, Uralla Gold Project. Higher gold value colours stretched to highlight the
strongest anomalies. Drill results previously reported2,18
Gumtree Prospect
Au High
98ppb
Anomalies with
preliminary drill
intercepts
KTN007: 14.0m @ 1.24 g/t Au from 68m
KTN005: 10.0m @ 1.32g/t Au from 9m
KTN006: 16.0m @ 0.79g/t Au from 10m
Au High
1300ppb
Au High
99ppb
Dyke/Gracie Prospects
Au High
998ppb
KTN010: 15.0m @ 2.09g/t Au from 12m
KTN011: 5.0m @ 1.04 g/t Au from 16m
KTN012: 6.0m @ 0.75g/t Au from 39m
Au High
333ppb
Untested anomalies
Au High
107ppb
Au High
90ppb
Au High
86ppb
Au High
741ppb
Au High
57ppb
Circular feature potentially
representing an intrusive
stock at depth
Martins Shaft Prospect (intercepts > 24 g.m)
SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m
SGRDD004: 18.0m @ 3.51 g/t Au from 52.0m
SGRDD014: 20.0m @ 2.33 g/t Au from 16.0m
SGRDD008: 24.0m @ 1.88 g/t Au from 73.0m
SGRDD010: 35.0m @ 1.10 g/t Au from 78.0m
SGRRC004: 24.0m @ 1.60 g/t Au from 4.0m
SGRRC017: 26.0m @ 1.20 g/t Au from 76.0m
SGRRC003: 29.0m @ 1.21 g/t Au from 25.0m
SGRRC003: 33.0m @ 0.91 g/t Au from 29.0m
SGRRC001: 27.1m @ 1.06 g/t Au from 0.0m
SGRRC006: 17.0m @ 1.61 g/t Au from 35.0m
SGRRC035: 22.0m @ 1.15 g/t Au from 90.0m
SGRRC005: 15.0m @ 1.60 g/t Au from 23.0m
Au High
1030ppb
Auger Drill
Assay Image
Au (ppb)
High : 1300
Low : 1
12
Figure 10. Gold assay image of 1,192 auger drill holes covering the Hudson’s group of prospects,
Uralla Gold Project. Lower gold values colours stretched to highlight broader anomalism. Drill
results previously reported2,18
Gumtree Prospect
Anomalies with
preliminary drill
intercepts
Untested anomalies
KTN007: 14.0m @ 1.24 g/t Au from 68m
KTN005: 10.0m @ 1.32g/t Au from 9m
KTN006: 16.0m @ 0.79g/t Au from 10m
Dyke/Gracie Prospects
KTN010: 15.0m @ 2.09g/t Au from 12m
KTN011: 5.0m @ 1.04 g/t Au from 16m
KTN012: 6.0m @ 0.75g/t Au from 39m
Circular feature potentially
representing an intrusive
stock at depth
Martins Shaft Prospect (intercepts > 24 g.m)
SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m
SGRDD004: 18.0m @ 3.51 g/t Au from 52.0m
SGRDD014: 20.0m @ 2.33 g/t Au from 16.0m
SGRDD008: 24.0m @ 1.88 g/t Au from 73.0m
SGRDD010: 35.0m @ 1.10 g/t Au from 78.0m
SGRRC004: 24.0m @ 1.60 g/t Au from 4.0m
SGRRC017: 26.0m @ 1.20 g/t Au from 76.0m
SGRRC003: 29.0m @ 1.21 g/t Au from 25.0m
SGRRC003: 33.0m @ 0.91 g/t Au from 29.0m
SGRRC001: 27.1m @ 1.06 g/t Au from 0.0m
SGRRC006: 17.0m @ 1.61 g/t Au from 35.0m
SGRRC035: 22.0m @ 1.15 g/t Au from 90.0m
SGRRC005: 15.0m @ 1.60 g/t Au from 23.0m
Auger Drill
Assay Image
Au (ppb)
High : 1300
Low : 1
13
Figure 11. Antimony assay image of 1,192 auger drill holes covering the Hudson’s group of
prospects, Uralla Gold Project. Lower antimony value colours stretched to highlight broader
anomalies. Drill results previously reported2,18
Gumtree Prospect
Anomalies with
preliminary drill
intercepts
KTN007: 14.0m @ 1.24 g/t Au from 68m
KTN005: 10.0m @ 1.32g/t Au from 9m
KTN006: 16.0m @ 0.79g/t Au from 10m
Dyke/Gracie Prospects
Untested anomalies
KTN010: 15.0m @ 2.09g/t Au from 12m
KTN011: 5.0m @ 1.04 g/t Au from 16m
KTN012: 6.0m @ 0.75g/t Au from 39m
Circular feature potentially
representing an intrusive
stock at depth
Martins Shaft Prospect (intercepts > 24 g.m)
SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m
SGRDD004: 18.0m @ 3.51 g/t Au from 52.0m
SGRDD014: 20.0m @ 2.33 g/t Au from 16.0m
SGRDD008: 24.0m @ 1.88 g/t Au from 73.0m
SGRDD010: 35.0m @ 1.10 g/t Au from 78.0m
SGRRC004: 24.0m @ 1.60 g/t Au from 4.0m
SGRRC017: 26.0m @ 1.20 g/t Au from 76.0m
SGRRC003: 29.0m @ 1.21 g/t Au from 25.0m
SGRRC003: 33.0m @ 0.91 g/t Au from 29.0m
SGRRC001: 27.1m @ 1.06 g/t Au from 0.0m
SGRRC006: 17.0m @ 1.61 g/t Au from 35.0m
SGRRC035: 22.0m @ 1.15 g/t Au from 90.0m
SGRRC005: 15.0m @ 1.60 g/t Au from 23.0m
Auger Drill
Assay Image
Sb (ppm)
High : 300
Low : 0.2
14
Figure 12. Potential mineralisation model for the Uralla Gold Project with two styles of gold
mineralisation emplacement shown: A) Vein style gold mineralisation, B) Intrusive hosted gold
mineralisation.
Tenements – June Quarter 2024
Project
Tenements Tenements
Tenements
Tenements
acquired disposed
as at 31
as at 30
during the during the
March 2024
June 2024
quarter
quarter
%
Interest
Units
Area
(km2)
Type of
Tenements
Uralla
EL8980
-
-
EL8980
100
80
237
Exploration
Webbs Consol
EL8933
-
-
EL8933
100
16
48
Exploration
Fender
EL9003
-
-
EL9003
100
76
224
Exploration
Tea Tree
EL9084
-
-
EL9084
100
24
71
Exploration
Thor
EL9085
-
-
EL9085
100
78
231
Exploration
Uralla West
EL9087
-
-
EL9087
100
22
65
Exploration
Sandon
EL9319
-
-
EL9319
100
273
809
Exploration
Webbs Consol Exp.
EL9454
-
-
EL9454
100
53
159
Exploration
-
EL9662
-
EL9662
100
399
1,105
Exploration
1,021
2,949
New England Antimony
15
New England Antimony
During the June quarter a new and extensive exploration licence was granted by the NSW
government to Lode. EL9662 covers an area of 399 units or approximately 1,105 square kilometres
and is prospective for orogenic structurally-controlled antimony mineralisation.
There are a number of recorded antimony prospects within the EL9662 exploration licence area,
including the historic Magword antimony mine which was operational more-or-less continuously from
1941 until 1971 and was Australia’s primary producer before the focus switched to Hillgrove in 1969.
Lode intends to commence preliminary exploration on EL9662 during the September quarter.
Net Smelter Royalty owned by Lode Resources Ltd
Lode Resources Ltd owns a 2% Net Smelter Royalty (NSR) and Right of First Refusal50,52 over
Thomson Resources Ltd’s 100% owned Webbs Silver Project (EL5674), containing a significant
undeveloped JORC Mineral Resource Estimate of 2.2Mt @ 205 g/t AgEq55 for a contained 14.2 Moz
AgEq55. Royalty rights are a commonly traded asset and there are numerous companies that
specialize in purchasing and holding such royalties.
The Webb’s Mineral Resource Estimate, at a 30 g/t Ag cut off, contains an Indicated and Inferred
resource of 2.2 Mt at 140 g/t Ag, 0.15% Cu, 0.55% Pb and 1.10% Zn for a contained 9.7 Moz Ag,
3.3 Kt Cu, 12 Kt Pb and 24 kt of Zn. Note, this is a completely separate project to Lode’s Webbs
Consol Silver Project located just 10km to the southwest.
Please refer to Thomson Resources Ltd’s announcement on 9 June 2022 titled “Thomson Delivers
14 Moz Silver Equivalent Indicated and Inferred Mineral Resource Estimate for Webbs Deposit” for
full project details including metal equivalent assumptions used by Thomson Resources Ltd.
The 2% Net Smelter Royalty and the Right of First Refusal held over Thomson Resources Ltd’s
Webbs Silver Project (EL 5674) are registered against the tenement in the NSW government Mining
Titles Register and therefore the Net Smelter Royalty and Right of First Refusal remains with the
asset as defined by the geographic boundaries of EL 5674 regardless of the tenement ownership.
Corporate
No significant corporate activities have occurred during the quarter.
•
As of 30 June 2024, the Company had cash reserves of approximately $2.278 million.
Expenditure for the quarter ended 31 March 2024 was approximately $504,000.
•
Exploration and evaluation expenditure was $168,000. Exploration spending over the next
quarter is expected to be levels comparable to the March 2024 quarter with drilling having
recommenced at the beginning of the September quarter.
•
Administration and corporate costs were $191,000, Staff costs were $155,000 and lease
payments were $8,000. During the June quarter, the aggregate amount of payments to
related parties and their associates totaled $155,000. The payments were made to
Directors or Director related entities for Directors’ consulting fees and superannuation.
•
No expenditure was incurred during the Quarter on mining production and development
activities.
16
About Lode Resources
Lode Resources is an ASX-listed explorer focused on the highly prospective but under-exploited
New England Fold Belt in north-eastern NSW. The Company has assembled a portfolio of brownfield
precious and base metal assets characterised by:
•
•
•
•
100% ownership;
Significant historical geochemistry and/or geophysics;
Under-drilled and/or open-ended mineralisation; and
Demo
Share your feedback
Discover