Multiple targets defined at Uralla Gold Project
Released
Released
Announcement PDF
ASX Announcement | 8 MAY 2024
AUGER DRILLING DEFINES
MUTIPLE TARGETS AT URALLA GOLD PROJECT
Highlights
•
Completion of 1,159 auger drill holes across approximately 1.6km2 at the Hudson’s
group of prospects at Lode’s Uralla Gold Project.
•
All assays have now been received with gold and pathfinder metals gridded, imaged
and/or contoured showing:
➢ Delineation of numerous gold anomaly highs, with assays up to 1,300 ppb
Au, each representing a prospective drill target.
➢ Approximately half of the defined gold anomalies have no hard rock outcrop,
potentially indicating blind gold mineralisation, whilst other gold anomalies
are enhancing previous surface work.
➢ Dyke/Gracie Lode area gold anomalies appear to form a circular feature
potentially representing an intrusive pluton and large mineralisation system
at depth.
➢ Pathfinder elements anomalies also potentially represent mineralised lodes
which are not obvious near surface.
•
Previous drilling intersected significant gold mineralisation, highlighting the project’s
potential. Results from these earlier and historic drill programs include:
SGRDD002
incl.
SGRDD004
incl.
SGRDD014
incl.
SGRDD008
incl.
SGRDD010
incl.
•
26.0 m @
14.0 m @
18.0 m @
7.0 m @
20.0 m @
8.0 m @
24.0 m @
18.5 m @
35.0 m @
5.0 m @
2.80
4.82
3.51
7.47
2.33
5.40
1.88
2.41
1.10
3.29
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
SGRRC004
incl.
KTN010
incl.
incl.
SGRRC017
SGRRC003
incl.
SGRDD003
incl.
24.0 m @
10.0 m @
15.0 m @
7.0 m @
4.0 m @
26.0 m @
29.0 m @
6.0 m @
33.0 m @
7.0 m @
1.60
3.00
2.09
3.65
4.18
1.20
1.21
2.90
0.91
2.83
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
g/t Au
Future drilling is planned at Uralla, underpinned by previous successes, results from
the just completed auger drilling programme and geological insights suggesting the
presence of an Intrusive Related Gold System (IRGS).
Managing Director, Ted Leschke, commented:
“We are very pleased with the results of the auger drilling as they indicate a number of new drill
targets prospective for gold mineralisation including a circular cluster in the Dyke/Gracie area
potentially representing a large mineral system at depth. Work is ongoing at Uralla with results
contributing to planning for the upcoming drill program.”
ASX Code: LDR
|
ACN: 637 512 415
A: Level 5, 1 Margeret St Sydney NSW 2000
|
|
www.loderesources.com
P: +61 2 9199 8017
|
E: info@loderesources.com
Lode Resources Ltd (ASX:LDR) (“Lode”, or the “Company”) is pleased to announce an
exploration update at the Company’s 100% owned Uralla Gold Project located in the New
England Fold Belt in north-eastern New South Wales. Lode leases cover over 300 km2 which is
almost the entire historic Uralla Goldfield, one of the earlier goldfields discovered in NSW and a
significant gold producer in the 1850’s.
Uralla Gold Project Auger Drill Programme Results
Over a 2-month period 1,192 auger drill holes were completed on a 25m x 50m grid spacing covering an
expansive 1.6km2 area covering the Hudson’s group of prospects (Gumtree, Dyke, Martins Shaft) at
Lode’s Uralla Gold Project.
The aim of the auger drill program was to identify areas of anomalous gold values as well as pathfinder
elements near surface so as to identify new drill targets in the Hudsons area as well as assisting with
deeper and infill drill targeting planned for this year.
An earlier high-density auger drill survey was successful in defining the Gumtree prospect, one of several
gold prospects within the Uralla Gold Project. Sampling deeper soils (C horizon) closer to bed rock has
demonstrated more coherent anomaly definition for gold as well as pathfinder metals.
All assays have now been received from this significant auger drill program with gold and pathfinder
metals imaged and/or contoured as shown in Figures 1 to 4. A number of observations and
interpretations can be made including:
•
Numerous gold anomaly highs (>10) have been defined, each representing a prospective drill
target.
•
289 auger samples graded >10 ppb Au, 23 auger samples graded 100 ppb Au and 3 auger
samples graded 1,000 ppb Au with the highest being 1,300ppb Au.
•
Over half of the gold anomalies defined have no hard rock outcrop, potential indicate blind
mineralisation, whilst other gold anomalies have enhanced previous surface work.
•
Two Au anomalies have been tested by earlier preliminary drilling1,2,18 with the best intercepts being
KTN010: 15.0m @ 2.09g/t Au from 12m and KTN007: 14.0m @ 1.24 g/t Au from 68m for the
Dyke/Gracie and Redgum Prospects respectively. Only the Martin Shaft Prospect has been
extensively drill tested by a previous exploration licence holder (Sovereign Gold Company Ltd) with
the best intercept being SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m. See Table 1.
•
A number of gold anomalies in the Dyke/Gracie Lode area appear to form a circular feature
potentially representing an intrusive pluton at depth and a source of mineralisation (see Figures
1,2 & 5).
•
There is a strong correlation between gold and pathfinder metals including a broad association
with antimony. Pathfinder elements can help define mineralised lodes which are not obvious near
surface.
•
Historic drilling by a previous exploration licence holder (Sovereign Gold Company Ltd) focused
on Martin Shaft prospect resulting in numerous gold intercepts. Confirmation drilling will be required
as much of this work predates the JORC code - 2012 edition1,2,18.
The highest endowed diamond and RC drilling results from earlier drill programs are shown in Table 1.
2
Table 1. Drilling at the Hudson’s group of prospects, Uralla Gold Project (previously reported1,2,18.)
Hole No.
SGRDD002
incl.
SGRDD004
incl.
SGRDD014
incl.
SGRDD008
incl.
SGRDD010
incl.
SGRRC004
incl.
KTN010
incl.
incl.
SGRRC017
SGRRC003
incl.
SGRDD003
incl.
SGRRC001
incl.
From
To
Interval
Gold
(m)
(m)
(m)
(g/t)
15.0
24.0
52.0
57.0
16.0
21.0
73.0
73.5
78.0
84.0
4.0
13.0
12.0
15.0
15.0
76.0
25.0
39.0
29.0
37.0
0.0
15.0
41.0
38.0
70.0
64.0
36.0
29.0
97.0
92.0
113.0
89.0
28.0
23.0
27.0
22.0
19.0
102.0
54.0
45.0
62.0
44.0
27.0
24.0
26.0
14.0
18.0
7.0
20.0
8.0
24.0
18.5
35.0
5.0
24.0
10.0
15.0
7.0
4.0
26.0
29.0
6.0
33.0
7.0
27.1
9.0
2.80
4.82
3.51
7.47
2.33
5.40
1.88
2.41
1.10
3.29
1.60
3.00
2.09
3.65
4.18
1.20
1.21
2.90
0.91
2.83
1.06
2.41
Target
Endowment
(m.g/t)
Martin Shaft
72.78
Martin Shaft
63.23
Martin Shaft
46.69
Martin Shaft
45.03
Martin Shaft
38.50
Martin Shaft
38.32
Dyke
31.38
Martin Shaft
Martin Shaft
31.29
35.09
Martin Shaft
30.12
Martin Shaft
28.83
Hole No.
SGRRC006
incl.
SGRRC005
incl.
SGRRC011
incl.
KTN007
incl.
and
KTN007
SGRRC002
incl.
SGRDD006
KTN005
incl.
KTN006
incl.
incl.
SGRDD001
SGRDD005
SGRRC022
SGRDD009
From
To
Interval
Gold
(m)
(m)
(m)
(g/t)
35.0
37.0
23.0
25.0
46.0
57.0
68.0
73.0
77.0
96.0
16.0
26.0
32.0
9.0
9.0
10.0
10.0
10.0
0.0
0.0
112.0
75.0
52.0
44.0
38.0
32.0
64.0
63.0
82.0
75.0
80.0
100.0
35.0
33.0
51.0
19.0
14.0
26.0
18.0
14.0
13.0
20.0
128.0
90.0
17.0
7.0
15.0
7.0
18.0
6.0
14.0
2.0
3.0
4.0
19.0
7.0
20.0
10.0
5.0
16.0
8.0
4.0
13.0
20.0
16.0
15.0
1.61
3.54
1.60
3.13
0.95
2.23
1.24
2.04
2.21
0.76
0.82
1.36
0.73
1.32
2.49
0.79
1.04
1.59
0.96
0.54
0.58
0.55
Target
Endowment
(m.g/t)
Martin Shaft
27.32
Martin Shaft
24.06
Martin Shaft
17.17
Gum Tree
17.29
Martin Shaft
15.56
Martin Shaft
Gum Tree
14.53
13.15
Gum Tree
12.58
Martin Shaft
Martin Shaft
Martin Shaft
Martin Shaft
12.48
10.84
9.22
8.20
Figure 1. Gold assay gridded image and contouring in the Dyke/Gracie Lode area located within the
Hudson’s group of prospects, Uralla Gold Project.
Circular feature potentially
representing an intrusive
stock at depth
Au High
998ppb
Au High
333ppb
Au High
107ppb
Au High
86ppb
Au High
741ppb
Au High
57ppb
3
Figure 2. Gold assay grided image and contouring of 1,192 auger drill holes covering the Hudson’s group
of prospects, Uralla Gold Project. Higher gold value colours stretched to highlight the strongest
anomalies. Drill results previously reported1,2
Gumtree Prospect
Au High
98ppb
Anomalies with
preliminary drill
intercepts
KTN007: 14.0m @ 1.24 g/t Au from 68m
KTN005: 10.0m @ 1.32g/t Au from 9m
KTN006: 16.0m @ 0.79g/t Au from 10m
Au High
1300ppb
Au High
99ppb
Dyke/Gracie Prospects
Au High
998ppb
KTN010: 15.0m @ 2.09g/t Au from 12m
KTN011: 5.0m @ 1.04 g/t Au from 16m
KTN012: 6.0m @ 0.75g/t Au from 39m
Au High
333ppb
Untested anomalies
Au High
107ppb
Au High
90ppb
Au High
86ppb
Au High
741ppb
Au High
57ppb
Circular feature potentially
representing an intrusive
stock at depth
Martins Shaft Prospect (intercepts > 24 g.m)
SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m
SGRDD004: 18.0m @ 3.51 g/t Au from 52.0m
SGRDD014: 20.0m @ 2.33 g/t Au from 16.0m
SGRDD008: 24.0m @ 1.88 g/t Au from 73.0m
SGRDD010: 35.0m @ 1.10 g/t Au from 78.0m
SGRRC004: 24.0m @ 1.60 g/t Au from 4.0m
SGRRC017: 26.0m @ 1.20 g/t Au from 76.0m
SGRRC003: 29.0m @ 1.21 g/t Au from 25.0m
SGRRC003: 33.0m @ 0.91 g/t Au from 29.0m
SGRRC001: 27.1m @ 1.06 g/t Au from 0.0m
SGRRC006: 17.0m @ 1.61 g/t Au from 35.0m
SGRRC035: 22.0m @ 1.15 g/t Au from 90.0m
SGRRC005: 15.0m @ 1.60 g/t Au from 23.0m
Au High
1030ppb
Auger Drill
Assay Image
Au (ppb)
High : 1300
Low : 1
4
Figure 3. Gold assay image of 1,192 auger drill holes covering the Hudson’s group of prospects, Uralla
Gold Project. Lower gold values colours stretched to highlight broader anomalism. Drill results
previously reported1,2,18.
Gumtree Prospect
Anomalies with
preliminary drill
intercepts
Untested anomalies
KTN007: 14.0m @ 1.24 g/t Au from 68m
KTN005: 10.0m @ 1.32g/t Au from 9m
KTN006: 16.0m @ 0.79g/t Au from 10m
Dyke/Gracie Prospects
KTN010: 15.0m @ 2.09g/t Au from 12m
KTN011: 5.0m @ 1.04 g/t Au from 16m
KTN012: 6.0m @ 0.75g/t Au from 39m
Circular feature potentially
representing an intrusive
stock at depth
Martins Shaft Prospect (intercepts > 24 g.m)
SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m
SGRDD004: 18.0m @ 3.51 g/t Au from 52.0m
SGRDD014: 20.0m @ 2.33 g/t Au from 16.0m
SGRDD008: 24.0m @ 1.88 g/t Au from 73.0m
SGRDD010: 35.0m @ 1.10 g/t Au from 78.0m
SGRRC004: 24.0m @ 1.60 g/t Au from 4.0m
SGRRC017: 26.0m @ 1.20 g/t Au from 76.0m
SGRRC003: 29.0m @ 1.21 g/t Au from 25.0m
SGRRC003: 33.0m @ 0.91 g/t Au from 29.0m
SGRRC001: 27.1m @ 1.06 g/t Au from 0.0m
SGRRC006: 17.0m @ 1.61 g/t Au from 35.0m
SGRRC035: 22.0m @ 1.15 g/t Au from 90.0m
SGRRC005: 15.0m @ 1.60 g/t Au from 23.0m
Auger Drill
Assay Image
Au (ppb)
High : 1300
Low : 1
5
Figure 4. Antimony assay image of 1,192 auger drill holes covering the Hudson’s group of prospects,
Uralla Gold Project. Lower antimony value colours stretched to highlight broader anomalies. Drill results
previously reported1,2,18.
Gumtree Prospect
Anomalies with
preliminary drill
intercepts
KTN007: 14.0m @ 1.24 g/t Au from 68m
KTN005: 10.0m @ 1.32g/t Au from 9m
KTN006: 16.0m @ 0.79g/t Au from 10m
Dyke/Gracie Prospects
Untested anomalies
KTN010: 15.0m @ 2.09g/t Au from 12m
KTN011: 5.0m @ 1.04 g/t Au from 16m
KTN012: 6.0m @ 0.75g/t Au from 39m
Circular feature potentially
representing an intrusive
stock at depth
Martins Shaft Prospect (intercepts > 24 g.m)
SGRDD002: 26.0m @ 2.80 g/t Au from 15.0m
SGRDD004: 18.0m @ 3.51 g/t Au from 52.0m
SGRDD014: 20.0m @ 2.33 g/t Au from 16.0m
SGRDD008: 24.0m @ 1.88 g/t Au from 73.0m
SGRDD010: 35.0m @ 1.10 g/t Au from 78.0m
SGRRC004: 24.0m @ 1.60 g/t Au from 4.0m
SGRRC017: 26.0m @ 1.20 g/t Au from 76.0m
SGRRC003: 29.0m @ 1.21 g/t Au from 25.0m
SGRRC003: 33.0m @ 0.91 g/t Au from 29.0m
SGRRC001: 27.1m @ 1.06 g/t Au from 0.0m
SGRRC006: 17.0m @ 1.61 g/t Au from 35.0m
SGRRC035: 22.0m @ 1.15 g/t Au from 90.0m
SGRRC005: 15.0m @ 1.60 g/t Au from 23.0m
Auger Drill
Assay Image
Sb (ppm)
High : 300
Low : 0.2
6
Figure 5. Potential mineralisation model for the Uralla Gold Project with two styles of gold mineralisation
emplacement shown.
Uralla Gold Project
Targeting two Intrusive Related Gold System mineralisation styles
Vein style mineralisation – see A in above diagram
•
Target dilations along structures and associated felsic dykes hosting gold and sulphide
mineralisation.
•
Focus on structures with sufficient dilation space with the potential to generate medium
size deposits.
Intrusion-hosted gold mineralisation - see B in above diagram
•
Target cupola structures where exsolved fluids accumulate in the apex, shoulder wall
rock of plutons with the potential to generate large deposits.
•
Blind plutons can be the source of the gold bearing fluids and/or provide the heat and
fracturing for remobilization and deposition of gold mineralisation along the pluton
boundaries.
7
Uralla Gold Project Overview 1,2,4,5,6,8,18
Located 8km west of the Uralla township Lode’s Uralla Gold Project is covered by EL8980 and EL9087.
These two exploration licences cover over 300 km2 which is almost the entire historic Uralla Goldfield,
one of the earlier goldfields discovered in NSW and a significant gold producer in the 1850’s.
Lode believes the goldfield is host to an Intrusive Related Gold System (IRGS) style mineralisation. The
Uralla Granodiorite and other intrusives, which intrude the Yarrowyck Granodiorite and Sandon Beds,
are believed to be responsible for gold mineralisation in the Uralla Goldfield.
The Uralla Gold Project consists of several key drill targets, including the Hudson’s group of prospects
which has demonstrated gold mineralisation at surface and at depth as shown in initial drilling at the
Martin’s Shaft Prospect with historical high-grade gold intercepts.
Lode has conducted extensive reconnaissance work at Uralla. This work includes mapping and sampling
which has revealed extensive disseminated gold mineralisation at surface and a strong association
between gold mineralisation and sulphides. The Hudson’s prospect group discovery was achieved
though methodical field work over an area where limited soil and rock sampling by previous explorers
indicated anomalous gold and arsenic values. Several other significant soil anomalies have also been
defined at Uralla including McCrossin’s, Fraser’s Find, Bannawerra Discovery and Goldsworth
prospects.
Each anomaly is defined by either enriched gold in soils, enriched pathfinder elements in soils, or both.
In addition, the underlying geology is different for each anomaly indicating that gold mineralisation styles
are likely to vary. Arsenic and antinomy are known to be a path finder metalloid for gold mineralisation
however this may vary with mineralisation styles.
Lode intends to continue carrying out additional mapping and sampling with a primary focus on areas
adjacent to the “Bonanza Dyke” structure as gold mineralisation appears to be spatially related to this
significant regional feature. Aeromagnetics reveal that this well-known regional structure extends for
several kilometres with a northeast-southwest orientation
Photo 1. Drilling at Lode’s Uralla Gold Project
8
Figure 6: The Uralla Gold Project – Gold soil assays plotted on geology and magnetics (TMI RTP 2VD) plus
prospects with summary of rock chip and drilling assays previously reported 1,2,4,5,6,8,18
Goldsworth Prospect
Elevated Au in soil samples, up to
2.58ppm
Historical drilling focus on
workings/narrow vein, not gold
anomaly
1,800m strike length
“Bonanza Dyke”
“Bonanza Dyke”
Frazer’s Find
Hudson’s Prospect Discovery
Elevated Au (up to 1.30 ppm) and As in soil
Disseminated gold mineralisation discovery by Lode
56 chip samples avg 3.29 g/t Au, up to 8.03 g/t Au
Drilling intercepts include :
7.0m @ 3.65 g/t Au
14.m @ 1.24 g/t Au
5.0m @ 2.49 g/t Au
Up to 76.90 g/t Au
and 1,110 g/t Ag in
waste dumps
Very poor recoveries
in previous shallow
drilling
IP chargeability
anomaly detected on
single line detected
down dip
Bannawerra Discovery
Discrete soil anomaly with
elevated Au, As, Pb & Sb in soils
1.5km long structure
Chip samples up to 2.3 g/t Au
Drill intercepts include:
13.9m @ 1.45 g/t Au
4.9m @ 2.75 g/t Au
Martin's Shaft
Drilling intercepts include :
14.0m @ 4.82 g/t Au
7.0m @ 7.49 g/t Au
18.5m @ 2.41 g/t Au
8.0m @ 5.30 g/t Au
IP chargeability anomaly detected
down dip
McCrossin’s Prospect
Elevated As, Ba, Pb values
Significant radiometrics
Untested by drilling
Strong IP chargeability anomaly
This announcement has been approved and authorised by Lode Resource Ltd’s Managing Director, Ted
Leschke.
9
Competent Person’s Statement
The information in this Report that relates to Exploration Results is based on information compiled by Mr Mitchell Tarrant, who
is a Member of the Australian Institute of Geoscientists. Mr Tarrant, who is the Project Manager for Lode Resources, has
sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity
which he is undertaking to qualify as a Competent Person as defined in the 2012 edition of the ‘Australasian Code for Reporting
of Exploration Results, Mineral Resources and Ore Reserves’. Mr Tarrant has a beneficial interest as option holder of Lode
Resources Ltd and consents to the inclusion in this Report of the matters based on the information in the form and context in
which it appears.
About Lode Resources (ASX:LDR)
Lode Resources is an ASX-listed explorer focused on the highly prospective but under-explored New
England Fold Belt in north-eastern NSW. The Company has assembled a portfolio of brownfield precious
and base metal assets characterised by:
• 100% ownership;
• Significant historical geochemistry and/or geophysics;
• Under drilled and/or open-ended mineralisation; and
• Demonstrated high-grade mineralisation and/or potential for large mineral occurrences.
Lode’s Project Locations (blue polygons)
Twin Hills
Gold & Silver
Mt Carrington
Gold & Silver
FMG Resources
New EL
Timbarra
Gold & Silver
Webbs Consol
Silver
Thor
Gold
Webbs
Silver
Sandon
Base Metals
Tea Tree
Gold
Uralla
Gold
Hillgrove
Gold & Antinomy
Rocky River
Gold
Okapi Resources
Enmore Gold Discovery
Newmont
Gold
Fender
Copper/Zinc
For more information on Lode Resources and to subscribe for our regular updates, please visit our website at
www.loderesources.com or email info@loderesoruces.com
10
Historical Drill Intercepts
1. Historical drill intercepts reported by previous Exploration Licence holders covering the Uralla Gold Project have been
recalculated using a 0.1 g/t Au cut-off so as to demonstrate the overall intercept in addition to higher grade intervals within
the overall intercept.
LDR announcement references
2. LDR Prospectus 14 April 2021 & LDR Supplementary Prospectus 6 May 2021
3. LDR announcement 30 June 2021 titled “ASX Market Release - Admission and Quotation”
4. LDR announcement 12 July 2021 titled “New gold mineralisation style discovered”
5. LDR announcement 20 July 2021 titled “Further Assays Enhance & Expand Uralla Gold Project”
6. LDR announcement 29 July 2021 titled “Lode Ramps Up Exploration at Uralla Gold Project”
7. LDR announcement 15 September 2021 titled “Drilling Commences at Webbs Consol Silver Project”
8. LDR announcement 5 October 2021 titled “Enhanced Drill Targets at Uralla Gold Project”
9. LDR announcement 19 October 2021 titled “Significant sulphides intersected at Webbs Consol”
10. LDR announcement 5 November 2021 titled “Lode Resources Adds New Projects To Base Metal Portfolio”
11. LDR announcement 17 November 2021 titled “First drill assays received for Webbs Consol Silver Project”
12. LDR announcement 29 November 2021 titled “Drilling Commences at Uralla Gold Project”
13. LDR announcement 1 December 2021 titled “Drilling Commences at Trough Gully Copper Mine”
14. LDR announcement 14 December 2021 titled “High metal recoveries in Webbs Consol metallurgy”
15. LDR announcement 14 December 2021 titled “High-grade mineralisation in Webbs Consol drilling”
16. LDR announcement 18 January 2022 titled “Webbs Consol new drill targets”
17. LDR announcement 15 February 2022 titled “High-grade copper and zinc intersected at Trough Gully Mine”
18. LDR announcement 21 February 2022 titled “Discovery of Gold Mineralisation Over Significant Widths”
19. LDR announcement 24 March 2022 titled “Drilling Recommences at Webbs Consol Silver-Base Metals”
20. LDR announcement 5 April 2022 titled “Significant Sulphide Mineralisation at Mt Galena Prospect”
21. LDR announcement 14 April 2022 titled “Outstanding Metal Recoveries in Trough Gully Testwork”
22. LDR announcement 31 May 2022 titled “High grade silver-lead-zinc drill results”
23. LDR announcement 2 June 2022 titled “Drilling Intersects 26.5m of Lead-Zinc-Silver Mineralisation”
24. LDR announcement 21 June 2022 titled “Over 1,000g/t Silver Eq Intercepted at Tangoa West”
25. LDR announcement 23 June 2022 titled “Another Thick (31.0m) Intercept of Sulphide Mineralisation”
26. LDR announcement 7 July 2022 titled “Further Mineralised Lodes Discovered at Webbs Consol”
27. LDR announcement 18 July 2022 titled “Most Significant Drill Intercepts to Date at the Webbs Consol”
28. LDR announcement 25 July 2022 titled “Mineralisation Extended to 150m Depth at Webbs Consol”
29. LDR announcement 17 August 2022 titled “Completion of Placement”
30. LDR announcement 18 August 2022 titled “Phase II Drilling to Commence at Webbs Consol”
31. LDR announcement 21 September 2022 titled “Phase II Drilling Commences at Webbs Consol”
32. LDR announcement 4 October 2022 titled “Webbs Consol Silver Project area expanded four-fold”
33. LDR announcement 11 October 2022 titled “Phase II Drilling Intersects 47m of Sulphide Mineralisation”
34. LDR announcement 26 October 2022 titled “Sixth Sulphide Lode Discovered at Silver Project”
35. LDR announcement 8 November 2022 titled “1,899 g/t Silver Eq Intercepted at Copy Cat Lode Discovery“
36. LDR announcement 17 January 2023 titled “54m High grade Silver Eq Intercept”
37. LDR announcement 1 February 2023 titled “Outstanding High-Grade Drill Intercept”
38. LDR announcement 27 February 2023 titled “Diamond Drilling Program Recommences at Webbs Consol”
39. LDR announcement 18 May 2023 titled “High-Grade Drill Intercepts at Webbs Consol”
40. LDR announcement 13 June 2023 titled “High-Grade Mineralisation Extended to 280m Vertical Depth”
41. LDR announcement 6 July 2023 titled “New Targets Defined at Webbs Consol Silver Project ”
42. LDR announcement 18 July 2023 titled “CSIRO Collaboration Study”
43. LDR announcement 10 August 2023 titled “Webbs Consol Silver Project Exploration Update”
44. LDR announcement 9 October 2023 titled “High-Grade Drill Intercepts At Webbs Consol Silver Project”
45. LDR announcement 16 October 2023 titled “Significant Drill Target Defined at WC Silver Project”
46. LDR announcement 22 November 2023 titled “Drilling Commences On Large Surface Silver Anomaly”
47. LDR announcement 19 February 2024 titled “Drilling at Webbs Consol North Delivers Solid Silver-Zinc Intercepts”
48. LDR announcement 12 March 2024 titled “Significant Auger Drill Program Completed At Uralla Gold Project”
49. LDR announcement 9 April 2024 titled “CSIRO Research Enhances Upside at Webbs Consol Silver Project”
11
JORC Code, 2012 Edition - Table 1.
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
technique
s
JORC Code explanation
Commentary
•
•
•
•
•
Drilling
technique
s
Drill
sample
recovery
•
•
•
•
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised
industry
standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the broad
meaning of sampling.
Include reference to measures taken to
ensure sample representivity and the
appropriate
calibration
of
any
measurement tools or systems used.
Aspects
of
the
determination
of
mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work
has been done this would be relatively
simple (eg ‘reverse circulation drilling was
used to obtain 1 m samples from which 3
kg was pulverised to produce a 30 g
charge for fire assay’). In other cases, more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information.
Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit
or other type, whether core is oriented and
if so, by what method, etc).
Method of recording and assessing core
and chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
•
•
•
•
•
•
•
•
•
•
•
Samples were collected by a qualified
geologist.
1192 deep soil (C horizon) samples were
collected at 25m x 50m spaced grid using a
hand-held petrol-powered auger.
Soil samples are sieved to 1000 microns with
the fine fraction submitted for analysis.
Submitted sample weights ranged from 50-200
grams
All soils samples were assayed.
Sample locations were surveyed with a
handheld GPS (+- 5m) and recorded.
No new diamond or RC drilling results
A hand-held petrol-powered auger was used to
drill holes vertical holes down to soil C horizon,
Hole depth range from 0.1m to 1.1m. The
average depth was 0.6m.
No new diamond or RC drilling results
Assay results should be seen as semiquantitative as soils sampled from bottom of
auger holes usually results in some dilution
from shallower soil horizons.
No new diamond or RC drilling results
12
Logging
Subsampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
Location of
data points
•
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral
Resource
estimation, mining studies and
metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the
relevant intersections logged.
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet
or dry.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for all
sub-sampling
stages
to
maximise
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to
the grain size of the material being
sampled.
• The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
• Nature of quality control procedures
adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (ie lack of
bias) and precision
have been established.
• The verification of significant intersections
by either independent or alternative
company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral Resource
•
No logging
•
•
Samples were sieved in the field.
Sample sizes are considered appropriate.
•
Samples are stored in a secure location and
transported to the ALS laboratory in Brisbane
QLD via a certified courier. Sample
preparation comprised drying (DRY-21),
weighed and pulverised (PUL-31).
The assay methods used were ME-MS41L
(refer to ALS assay codes). ME-MS41L is
aqua regia digest with ICP-MS analysis with
various detection limits. This analysis
provides extremely low detection limits.
Only internal laboratory checks were used for
QACQ.
•
•
•
•
•
•
•
Laboratory results have been reviewed by
Project Manager.
Laboratory CSV files are merged with GPS
Location data files using unique sample
numbers as the key.
No adjustments made to assay data.
Sample points were recorded using a
handheld GPS (+- 5m).
Sampling points are recorded as x and y
coordinates.
13
estimation.
Specification of the grid system used.
Quality and adequacy of topographic
control.
•
•
Accuracy is assumed to be +/-5m
Grid system used is GDA94 UTM zone 56
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution
is sufficient to establish the degree of
geological
and
grade
continuity
appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and
classifications applied.
• Whether sample compositing has been
applied.
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
• The measures taken to ensure sample
security.
•
•
•
Results will not be used for resource
estimation.
Sampling consisted 1192 soil samples.
No composting has been applied
Share your feedback
Discover